world leader in high performance signal processing
Trace:

Differences

This shows you the differences between two versions of the page.

mcapi_bmp2jpg_demo [2013/11/28 04:41]
aaronwu1 [Brief introduction]
mcapi_bmp2jpg_demo [2013/11/28 04:48] (current)
aaronwu1 [Test method]
Line 5: Line 5:
 ===== Test method===== ===== Test method=====
  
-First configure the kernel and buildroot distribution as other general MCAPI test case, as described in https://docs.blackfin.uclinux.org/doku.php?id=test_icc+First configure the kernel and buildroot distribution as other general MCAPI test case, as described in https://docs.blackfin.uclinux.org/doku.php?id=test_icc, configure to enable the USB camera following http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:usb_video_device_class, and select to enable the ffmpeg.
  
-Then put a BMP file of 24bpp(or use this one directly: {{:test.zip|}})under /bin of your target board, run following: 
  
 load icc server to slave core load icc server to slave core
Line 25: Line 24:
 </code>   </code>  
  
-When the above is done, you should have a test.jpg file created in root directory of your target board.+When the above is done, you should have a test.jpg file created in /bin of your target board.