GENERAL DESCRIPTION Card that attaches to the STAMP board I2C/Keypad adapter Keypad See also: gpio-keys Kernel Configuration for TWI/I2C support <*> I2C support <*> I2C device interface I2C Algorithms ---> I2C Hardware Bus support ---> Miscellaneous I2C Chip support ---> [ ] I2C Core debugging messages [ ] I2C Algorithm debugging messages [ ] I2C Bus debugging messages [ ] I2C Chip debugging messages I2C Hardware Bus support For BF533 or BF561 <*> Generic Blackfin and HHBF533/561 development board I2C support BFIN I2C SDA/SCL Selection ---> For BF537/6/4 BF527/5/2 and BF549/8/4/2 <*> Blackfin TWI I2C support (50) TWI clock (kHZ) < > Parallel port adapter (light) < > I2C/SMBus Test Stub < > PCA9564 on an ISA bus Setting up Input Device Support Device Drivers Input device support <*> Generic input layer (needed for keyboard, mouse, ...) --- Userland interfaces < > Mouse interface < > Joystick interface (NEW) < > Touchscreen interface (NEW) <*> Event interface < > Event debugging (NEW) --- Input Device Drivers [ ] Keyboards ---> [ ] Mouse ---> [ ] Joysticks (NEW) ---> [ ] Touchscreens (NEW) ---> [*] Miscellaneous devices ---> Hardware I/O ports ---> Miscellaneous devices <*> User level driver support (NEW) < > PF buttons input device <*> TWI/I2C Keypad input device (72) IRQ Default: 72 for BF537-STAMP (STAMP TWI (Two Wire Interface (I2C-compatible)) Extender Card JP1 SET 15-16) 39 for BF533-STAMP (STAMP TWI (Two Wire Interface (I2C-compatible)) Extender Card JP1 SET 15-16) 212 for BF548-EZKIT (STAMP TWI (Two Wire Interface (I2C-compatible)) Extender Card JP1 SET 9-10) 79 for BF527-EZKIT (STAMP TWI (Two Wire Interface (I2C-compatible)) Extender Card JP1 SET 9-10) see also here gpio_interrupt_processing Blackfin test programs [ ] PPI test program [ ] TWI LCD test program [*] TWI KEYPAD test program [ ] Sqlite test program Help Usage: twikeypad_test [-h?v] -h? this help -v print version info -r repeate -q quiet mode root:~>