| Tracker Name |
Field Name |
Summary |
Priority |
Status Id |
| Bugs | Fixed In Release | [#2718] /proc/self/exe link is broken for FLAT binaries | 3 | Open |
| [#4278] In 08r1 branch, when ping/telnet/ftp to BF533-EZKIT, xenomai kernel shows warning messages | 3 | Closed |
| [#4560] In gadgetfs test for 548, an error message comes out saying "Invalid argument" | 3 | Closed |
| [#4888] fdpic traps test case 18 would make kernel panic on bf533-stamp | 2 | Closed |
| [#4988] run ./traps_test # sometimes wouldn't echo the new line on some BF537 and BF533 stamp boards | 2 | Closed |
| [#5075] portmap build fail in latest trunk with toolchain-09r1-rc5 | 2 | Closed |
| [#5080] build 561 kernel fails at bfin_dma | 2 | Closed |
| Found In Release | [#4191] Kernel does not boot if re-program clocks on trunk | 2 | Closed |
| [#4194] [ltp] A bug in LTP test case cause execve05 crashed in smp kernel | 3 | Closed |
| [#4207] build smb sometimes fails at mkcramfs.c on branch 08r1 | 4 | Closed |
| [#4430] NULL_POINTER test failed in trunk kernel with SMP patch | 3 | Closed |
| [#4545] netperf REQUEST/RESPONSE test on bfin mac slower than before | 3 | Closed |
| [#4548] BF561 SMP stoped booting when turn off D-cache | 3 | Closed |
| [#4553] Trunk kernel with SMP patch can not bootup | 3 | Closed |
| [#4558] DMA with SPI flash doesnt work on BF533-STAMP w/W25X10 | 3 | Closed |
| [#4559] SMP patched kernel build faild with SMP disabled | 3 | Closed |
| [#4560] In gadgetfs test for 548, an error message comes out saying "Invalid argument" | 3 | Closed |
| [#4576] BF527 0.2 silicon has different CPUID (DSPID) value | 3 | Closed |
| [#4594] GPIO bank caculating error cause kernel booting fail on BF548 | 2 | Closed |
| [#4596] rsh frequently get stuck on trunk head kernel | 3 | Closed |
| [#4607] ide-cdrom detects error when kernel booting up | 3 | Closed |
| [#4618] [ltp] ltp test case connect01 crashed in trunk | 3 | Closed |
| [#4627] showing cplbinfo crashes with buffer overflow with cplb-nompu | 3 | Closed |
| [#4649] Kernel crashes after install and remove module blackfin_cam for several times | 2 | Closed |
| [#4654] Kernel panics upon boot - hits BUG_ON in arch/blackfin/kernel/cplb-nompu/cplbinit.c:428/generate_cplb_tables_cpu() | 3 | Closed |
| [#4669] WIFI USB tanges don't fully work on BF548-EZKIT and BF527-EZKIT | 3 | Closed |
| [#4671] add workaround for anomaly 05000412 | 3 | Closed |
| [#4691] [ltp] some fadvise64 cases fails on blackfin unexpectedly | 3 | Closed |
| [#4710] kernel will crash when record and play in bf527-ezkit | 1 | Closed |
| [#4715] sport test unable to request sport rx dma channel | 2 | Closed |
| [#4734] traps test case 19 for exception 0x2d fails | 2 | Closed |
| [#4739] netperf_tcp_rr through bfin_mac is almost zero with set buffer packets | 3 | Closed |
| [#4743] Dmacopy failed in BF537-STAMP | 2 | Closed |
| [#4745] http(s) speed slow on bf527 | 3 | Closed |
| [#4746] Can't re-progam cclk and sclk for BF518f-ezkit | 3 | Closed |
| [#4761] During boot: WARNING: at fs/sysfs/dir.c:462 _sysfs_add_one | 3 | Closed |
| [#4769] [ltp] ltp test case ptrace03 failed on all platform | 3 | Closed |
| [#4774] 561 SMP kernel can't boot from jffs2 in latest trunk | 1 | Closed |
| [#4775] Run "reboot" hangs bf518-ezbrd | 2 | Open |
| [#4776] BF54x, BF51x SD host driver: Wrong capacity for 8GB SDHC card | 4 | Closed |
| [#4777] microwin build error: make[4]: *** No rule to make target `-lfreetype' | 3 | Closed |
| [#4784] [ltp] LTP test case shmat01 failed in trunk for ltp-full-20081130 | 3 | Closed |
| [#4785] [ltp]some LTP test cases failed for sync_pipe_wait in trunk for ltp-full-20081130 | 3 | Closed |
| [#4786] [ltp] LTP test case semop05 failed in trunk for ltp-full-20081130 | 3 | Closed |
| [#4787] [ltp] LTP test case shmctl01 failed in trunk for ltp-full-20081130 | 3 | Closed |
| [#4789] linphone stuck after startup | 2 | Closed |
| [#4808] BFLLCD card don't work on BF526-EZBRD | 3 | Closed |
| [#4811] serial uart 1 case send data from host to target frequently see diffs | 3 | Closed |
| [#4812] built pack_cis fails to be used now | 3 | Closed |
| [#4813] cp on nand device fails now | 3 | Closed |
| [#4814] umount jffs file system on bf548 would fail | 3 | Closed |
| [#4820] stack info will show up 2 mins after run oprofile test | 3 | Closed |
| [#4821] yaffs crash when running bonnie++ | 3 | Closed |
| [#4824] AD1980 AC97 reset failed in BF527-EZKIT | 3 | Closed |
| [#4827] BF548 Nor flash error running bonnie++ | 4 | Closed |
| [#4831] [ltp] LTP test case semctl01 failed in trunk for ltp-full-20081130 | 3 | Closed |
| [#4833] R/W on BF527 Nand hangs | 2 | Closed |
| [#4835] set kgdb hardware breakpoint when testing through uart would have error | 3 | Closed |
| [#4836] kgdb on bf527-ezkit would have Ignoring packet error | 3 | Closed |
| [#4842] multiple insmod of bf5xx_nand.ko panics | 3 | Open |
| [#4847] build e2fsprogs failed after update to version 1.41.4 | 3 | Closed |
| [#4848] Building shared-flat oprofile failed at not finding bfd library | 3 | Closed |
| [#4851] kernel failed to boot at at bfin_mac_mdio on 527-ezkit in latest trunk | 2 | Closed |
| [#4864] kernel build fails at can4linux now | 3 | Closed |
| [#4868] For 527-ezkit/548-ezkit, if ttyBF0 is not set in bootargs, no kernel info shows when boot from uImage | 3 | Closed |
| [#4879] traps test case 21 exception 0x3f: l1_instruction_access would make kernel panic on bf533 stamp | 2 | Closed |
| [#4883] romfs-inst.sh not work properly when install a shell script | 3 | Closed |
| [#4885] rmmod bfin_mac would have dump info | 2 | Closed |
| [#4887] watchdog fails to reboot on bf548 ezkit when get killed | 2 | Closed |
| [#4888] fdpic traps test case 18 would make kernel panic on bf533-stamp | 2 | Closed |
| [#4890] run linphone with ad73322 would make kernel panic | 2 | Closed |
| [#4891] netperf_tcp_stream have no response received on bf548 ezkit with default setting | 3 | Closed |
| [#4896] mmc/sd card can not be detect in bf518f-ezbrd | 3 | Closed |
| [#4900] kernel fails to build in pm.c when allow wakeup from standby by GPIO | 3 | Closed |
| [#4902] ping through vlan on bf518f ezbrd to two ethernel card are both ok while only one is connected | 3 | Closed |
| [#4903] ping to eth1 on vlan of 518f ezbrd can still work for a while after the eth1 is turn off | 3 | Closed |
| [#4904] Simple GPIO test fail in BF548-EZKIT | 3 | Closed |
| [#4909] Test spi/SD with exceptionally by framework way | 3 | Closed |
| [#4911] kgdb would have Segmentation fault on bf561. | 3 | Closed |
| [#4914] rts/cts doesn't work on bf548 ezkit board. | 3 | Closed |
| [#4916] On BF537 with AD1836, it fails to record wav audio with particular settings by alsa lib tool | 2 | Closed |
| [#4921] gadget generic/linuxACM tests fail | 2 | Closed |
| [#4923] usb gadget zero control test NO. 10 fails | 2 | Closed |
| [#4924] usb gadget zero bulk test NO. 1/3/5/7 fails on 527 | 2 | Closed |
| [#4927] usb gadget zero bulk test at13 fails on bf548 | 2 | Closed |
| [#4928] ad1981b add-on board fails to work on bf527-ezkit sport1 | 3 | Closed |
| [#4929] ethernet gadget don't work on 537 with a USB-LAN extender | 3 | Closed |
| [#4932] some test will hang for gadget zero bulk test on bf548 | 2 | Closed |
| [#4933] test 7 will hang sometimes for gadget fs bulk test on bf527 | 2 | Closed |
| [#4934] test 1/5 will hang sometimes for gadget fs bulk test on bf527 | 2 | Closed |
| [#4938] gadget storage ram test failed at fdisk on bf527 | 2 | Closed |
| [#4939] mtd-utils build fails on some machine with host gcc 3.3 | 3 | Closed |
| [#4940] On bf548-ezkit, ethernet fails to work after wakeup from "mem" | 3 | Closed |
| [#4963] trunk head kernel build fails at user/dosfstools | 3 | Closed |
| [#4965] Build xip kernel failed at genromfs-mkdevdir.sh | 3 | Closed |
| [#4968] early_printk doesn't print out at the correct baud rate | 3 | Closed |
| [#4969] build shared flat fails at libpng | 2 | Closed |
| [#4970] SSM2602 can't work in 22050 sample rate | 3 | Closed |
| [#4981] reprogramme clock for bf548 kernel can't boot | 3 | Closed |
| [#4983] SVN trunk kernel compiled for bf548 v0.2 chip crashes during boot | 1 | Closed |
| [#4985] build kernel failed at mkdosfs when dosfsck is disabled | 3 | Closed |
| [#4988] run ./traps_test # sometimes wouldn't echo the new line on some BF537 and BF533 stamp boards | 2 | Closed |
| [#4989] shared flat kernel boot fails | 2 | Closed |
| [#4995] Build kernel with default configuration failed at libjpeg | 3 | Closed |
| [#4997] ppitest fails for bfin_ppi driver on bf537 | 2 | Closed |
| [#5053] EXT2_INODES and EXT2_BLOCKS values reversed in vendor.mak | 3 | Closed |
| [#5073] BF518 kernel crashed during boot up in trunk | 2 | Closed |
| [#5074] REPEAT START mode doesn't repeat in bfin twi i2c driver | 2 | Closed |
| [#5075] portmap build fail in latest trunk with toolchain-09r1-rc5 | 2 | Closed |
| [#5077] g729 test failed at case g729ab_testfdpic | 3 | Closed |
| [#5080] build 561 kernel fails at bfin_dma | 2 | Closed |
| [#5101] Random hang when repeating test hardware error trap | 3 | Closed |
| [#5113] build kernel fails at drivers/serial/bfin_5xx.c for bf561-ezkit | 3 | Closed |
| [#5114] build kernel fails at setup.c for bf537-stamp | 3 | Closed |
| [#5121] pnormtd test fails on bf518-ezbrd trunk and makes board fail to boot up | 2 | Closed |
| [#5126] Build sqlite fails at trunk for dlfcn.h when built as FLAT | 3 | Closed |
| [#5129] Application traps_test fails to run | 2 | Closed |
| [#5131] Build qt fails in trunk when USB is enabled | 2 | Closed |
| [#5132] Build default bf538-ezkit kernel fails in trunk | 2 | Closed |
| [#5133] dmacopy test failed for bf561-ezkit when copy between L2 and SDRAM | 2 | Closed |
| [#5134] kernle can not boot up in bf537-stamp/bf527-ezkit for jffs2 test | 3 | Closed |
| [#5135] error info shows when reboot kernel after run oprofile test | 3 | Closed |
| [#5136] Linphone: Can't hear each other and "Data access misaligned address violation" | 3 | Closed |
| [#5138] pnormtd test fails on bf526 with error message "Read-only file system" | 3 | Closed |
| [#5139] XIP kernel can not boot up in bf537-stamp with MPU enabled | 2 | Closed |
| [#5140] malloc-perf fails frequently on bf537-stamp with mpu | 3 | Closed |
| [#5141] Build xenomai kernel failed at gptimer | 3 | Closed |
| [#5142] dd bfin-otp device with big count has Input/output error | 3 | Closed |
| [#5143] error info shows up when modprobe isp1760 | 3 | Closed |
| [#5147] Fails to write to usb storage with sl811 on bf537-stamp | 2 | Closed |
| [#5151] coreb test fails on 561 | 2 | Closed |
| [#5152] mmap1 test fails for bf537 mpu | 3 | Closed |
| [#5153] mmap3/5/6/7/9 test fails for bf537 mpu | 3 | Closed |
| [#5157] ad1980 driver can not initialize correctly on bf527-ezkit | 2 | Closed |
| [#5160] uImage doesn't pass parameter from uboot to kernel now | 2 | Closed |
| [#5162] Linphone: Data access misaligned address | 3 | Open |
| [#5165] netperf TCP REQUEST/RESPONSE test with big buffer on bf537 has obvious drop | 3 | Closed |
| [#5168] build cpufrequtils into fdpic format has error | 3 | Closed |
| [#5170] build xenomai failed on 518f-ezbrd and bf538-ezkit at init.h | 3 | Closed |
| [#5171] Requesting Peripherals failed for bfin spi during bf538 boot up | 2 | Closed |
| [#5174] app horch in Blackfin app programs fails to build | 3 | Closed |
| [#5176] app cpufrequtils in Blackfin app programs fails to build in FDPIC | 3 | Closed |
| [#5177] app vlc build failed at libSDL.so | 3 | Closed |
| [#5178] app UVC_VIDEO in Blackfin app programs fails to build | 3 | Closed |
| [#5182] build kernel with libsysfs fails for fdpic format | 3 | Closed |
| [#5183] liblzma fails to build for both fdpic and flat | 3 | Closed |
| [#5184] build kernel with lib mediastreamer fails | 3 | Closed |
| [#5185] Build kernel with lib pam fails | 3 | Closed |
| [#5186] build kernel with popt fails | 3 | Closed |
| [#5187] build kernel with lib aio fails for flat format | 3 | Closed |
| [#5189] [ltp] fcntl14 case 21 fails since 2009.5.8 | 3 | Closed |
| [#5190] [ltp] sysctl01, sysctl03, sysctl04 fail since 2009.4.1 | 3 | Closed |
| [#5191] [ltp] posix_fadvise02, posix_fadvise03, posix_fadvise04 fail since 2009.2.17 | 2 | Closed |
| [#5196] sdiommc kernel failed to boot up in BF518F-EZBRD | 2 | Closed |
| [#5197] running traps test case in fdpic format would randomly make kernel reboot | 2 | Closed |
| [#5202] strnlen_user and strlen_user don't check if there are a good/bad pointer before accesses happen. | 3 | Closed |
| [#5203] SPI driver fails to deactive chipselect in SPI_MODE_3 | 3 | Closed |
| [#5205] flash_eraseall fails to erase /dev/mtd2 on bf526 ezbrd for it is Read-only file system | 3 | Closed |
| [#5206] mtdblock2 on bf518 can't be recognized | 2 | Closed |
| [#5208] SST spi flash on bf526 is not supported under Linux | 2 | Closed |
| [#5212] xip kernel fails to boot for bf518/bf526 | 2 | Closed |
| [#5213] kgdb debug on bf561 SMP kernel fails to show correct core ID | 3 | Closed |
| [#5216] fail to read/write SATA hard disk connected to bf537 IDE daughter board via SATA/IDE converter | 3 | Closed |
| [#5218] bfin-dma test program fail to execute | 2 | Closed |
| [#5220] spi flash on bf518f ezbrd doesnt seem to work (returns all 0xff's) | 3 | Closed |
| [#5223] Latest kernel in 09r1 branch fails to boot in UART boot mode on bf548/bf518f | 2 | Closed |
| [#5224] kernel with CONFIG_BFIN_KERNEL_CLOCK fails to boot on bf526 ezbrd 0.2. | 2 | Closed |
| [#5226] KGDB hangs in smc91x poll handler if switch cpu 3 times on bf561 SMP kernel. | 2 | Closed |
| [#5228] adp5520 keys doesn't function on branch head kernel | 2 | Closed |
| [#5229] AD1836 fail to record while compiled as 6 channels mode | 2 | Closed |
| [#5253] schedule to CPU0 first would receive signal SIGTRAP when kgdb SMP kernel | 3 | Closed |
| [#5255] ping target board sometimes get wrong data byte for gadget ethernet pio mode | 3 | Closed |
| [#5257] Build usb gadget driver with DMA mode will fail | 3 | Closed |
| [#5258] test 2/4/6/8 will fail for gadget fs bulk test pio mode on bf527/bf548 | 2 | Closed |
| [#5259] at13 test case fails for gadget_fs bulk test on bf548/bf527 | 2 | Closed |
| [#5264] ping packet size test will fail for gadget ethernet test with DMA mode | 2 | Closed |
| [#5265] tftlcd module lq035 fails to install on bf537-stamp | 2 | Closed |
| [#5267] ping flood test fails for gadget ethernet test with DMA mode | 2 | Closed |
| [#5268] can not find storage device node in gadget storage test of 548 harddisk with DMA mode | 2 | Closed |
| [#5269] can not find storage device node in gadget storage ram test with DMA mode | 2 | Closed |
| [#5270] smb mount slow if both of the ethernet cards are connected on bf518f ezbrd. | 2 | Closed |
| [#5272] serial uart0 still would fail to get data file from host on some machines | 2 | Closed |
| [#5274] enable "CONFIG_DEBUG_BFIN_HWTRACE_EXPAND" hangs kernel | 2 | Closed |
| [#5276] gadget zero bulk test(1/3/5/7/2/4/6/8) hang up sometimes on bf527 with DMA mode | 2 | Closed |
| [#5287] kgdb kernel with write through policy on bf533 stamp would have dump info | 3 | Open |
| [#5288] copy to spi flash on bf526 ezbrd would trigger kernel panic. | 3 | Closed |
| [#5290] SDIO mmc fails to work on bf518f-ezbrd board 0.2 | 2 | Closed |
| [#5296] kernel detects wrong version number in bf526-ezbrd | 3 | Closed |
| [#5297] Kernel fails to boot in BF526-EZBRD with max core clock 600MHz | 2 | Closed |
| [#5298] twikeypad_test on pcf8574_keypad open error 2 for no input device | 2 | Closed |
| [#5299] joystick fails to feel the touch now | 2 | Closed |
| [#5300] sw4.3 on bf537 fails to control the console output | 3 | Closed |
| [#5301] gadget zero bulk test 13 hang up sometimes on bf527 with DMA mode | 2 | Closed |
| [#5302] ad7877 touchscreen fails to be probed on bf527 ezkit | 2 | Closed |
| [#5303] twi lcd fails to open lcd device on bf537 stamp | 2 | Closed |
| [#5304] On bf561-ezkit, run coreb test with C language, sometimes warning shows up | 3 | Closed |
| [#5309] ppifcd fails to run test on bf537 stamp | 2 | Closed |
| [#5310] Install ad1980/1 module failed with "Unknown symbol _ac97_bus_type" | 3 | Closed |
| [#5312] power management of suspend to ram fails in BF533-STAMP | 2 | Closed |
| [#5315] awg test fails to show the generated wave on the oscilloscope | 2 | Closed |
| [#5317] under run happens with ad1980 on bf548-ezkit | 3 | Closed |
| [#5318] canbus on bf48 ezkit fails to receive data | 3 | Closed |
| [#5319] lq035 fails to work on bf537-stamp after wake up from mem | 2 | Closed |
| [#5320] can not remove all installed module after modprobe bf537_lq035 | 4 | Closed |
| [#5321] modprobe i2c lcd on bf533 stamp wait long time | 2 | Closed |
| [#5322] From cache Write back to sd card with exception in 518ezbrd | 3 | Closed |
| [#5323] network is not started after bootup if set console=null in u-boot | 2 | Closed |
| [#5324] dmacopy test crashed in BF561-EZKIT SMP kernel | 2 | Closed |
| [#5325] Kernel fails to build at early_printk.c in latest 09r1 branch | 2 | Closed |
| [#5326] cpufreq-set can change cpu freq but bogomips remains | 2 | Closed |
| [#5327] After wake up from mem, ethernet can't work on bf518f-ezbrd | 3 | Closed |
| [#5328] usb device will reset on bf527-ezkit for dma mode when mke2fs in usb storage | 3 | Closed |
| [#5329] ssm2602 module can not be removed on bf527-ezkit | 3 | Closed |
| [#5330] For ad1980 on BF548-EZKIT, kernel fails to wake up | 2 | Closed |
| [#5331] Dll test case crashed in bf537-stamp mpu kernel | 2 | Closed |
| [#5332] dmacopy test case crashed in bf537-stamp mpu kernel | 2 | Closed |
| [#5336] canbus and ppifcd drivers can not be built on BF538-EZKIT | 3 | Closed |
| [#5337] mem_fragment test failed in BF533-EZKIT | 3 | Closed |
| [#5338] cat string from target to host through sport uart would lost chars | 3 | Closed |
| [#5342] branch head kernel build fails at traps.c on bf526 ezbrd | 2 | Closed |
| [#5343] bf537 mpu kernel can not wake up from mem | 2 | Closed |
| [#5348] Bonnie++ test failed in spi mmc bf537-stamp | 2 | Closed |
| [#5349] Traps test failed in bf561 smp kernel | 2 | Closed |
| [#5350] Build bf526 kernel failed at traps.c | 2 | Closed |
| [#5351] Wake up from mem in bf548-ezkit, audio apps fail to work | 2 | Closed |
| [#5354] Wake up from mem in bf527-ezkit, audio driver fail to work (can't resolve symbol) | 2 | Closed |
| [#5357] Build mplayer test failed in bf527/bf537 | 2 | Closed |
| [#5358] rotary input device driver can't sense the wheel on bf527 ezkit. | 2 | Closed |
| [#5363] spi mmc is not supported in bf533-stamp | 3 | Closed |
| [#5364] ad1981b fails to work on bf533-stamp | 2 | Closed |
| [#5365] ad1980 module can not be installed in bf527-ezkit | 2 | Closed |
| [#5366] ad1836 audio shakes sometimes | 2 | Closed |
| [#5367] Uninstall ad1836 module failed | 2 | Closed |
| [#5368] probe of AD1836 failed on bf533-stamp sport0 | 2 | Closed |
| [#5369] ad73311 fails to initialize on bf533-stamp | 2 | Closed |
| [#5370] alsa tool fails to work after wake up from mem in bf537-stamp with ad1836 (can't resolve symbol) | 2 | Closed |
| [#5371] Sometimes wake up from standby will crash in BF527-EZKIT with ssm2602 | 2 | Closed |
| [#5374] Bluetooth kernel crashed in bf537-stamp with cf extender | 2 | Closed |
| [#5376] mmap05 sometimes can not pass when MPU | 3 | Closed |
| [#5380] Bluetooth CF card didn't work on BF537-STAMP | 2 | Closed |
| [#5382] mmcspi: Can not detect SD card in bf533-stamp if connecting an ad1836 board | 4 | Open |
| [#5383] traps test on bf538 ezkit would make kernel reboot at case 13 | 2 | Closed |
| [#5389] build pictureflow fails at branch head | 2 | Closed |
| [#5412] Kernel image for g729 test can not boot up in branch | 2 | Closed |
| [#5430] SPI kernel lockup | 3 | Closed |
| Ongoing Work | Scheduled for Release | [#2299] SMP for BF561 | 2 | Closed |
| [#2316] Enable multichannel support for ALSA library | 3 | Closed |
| [#2471] support DSA in bfin_mac and each VLAN per port in on board switch | 3 | Closed |
| [#2808] ADV7183 video input card for EZKits (BF533, BF561) | 3 | Closed |
| [#3207] get oprofile working with user applications | 3 | Closed |
| [#3428] verify/integrate kgdb work with mainline | 2 | Closed |
| [#3431] convert UART flow control emulation from polled to interrupt | 3 | Closed |
| [#3571] Enable multichannel support in AD1980 ASOC driver | 3 | Closed |
| [#3631] cleanup arch/blackfin/kernel/traps.c handling code and add traps_test.c to regression | 3 | Closed |
| [#3635] PTRACE_PEEKDATA does not seem to work which breaks umoven() in strace | 3 | Closed |
| [#3656] cleanup BF54x support in serial driver | 3 | Closed |
| [#3854] integrate qt embedded lib into the dist | 2 | Closed |
| [#3862] Functional power management support | 3 | Closed |
| [#3988] boa needs to be cleanly ported to nommu | 3 | Closed |
| [#4038] Add driver for AD73322 chip | 1 | Closed |
| [#4048] review the new anomalies of all bfin arch and update kernel lists or walkaround. | 3 | Closed |
| [#4132] cleanup BF561 coreb misc char driver | 2 | Closed |
| [#4212] Emulate USB sound device on blackfin board | 2 | Closed |
| [#4213] Extend L1 SRAM malloc to handle L2 SDRAM as well | 3 | Closed |
| [#4214] Port libertas WIFI over SDIO driver to blackfin | 2 | Closed |
| [#4255] Add a driver for EMUDAT emulated kernel UART device with only one port | 3 | Closed |
| [#4261] add Kconfig to make L2 cachable | 4 | Closed |
| [#4297] migrate AD73311 driver from ALSA to ASOC | 3 | Closed |
| [#4304] Port mmc_spi driver in kernel 2.6.26 to blackfin istead of current spi_mmc driver from Hans | 3 | Closed |
| [#4305] Update kernel to 2.6.26 | 2 | Closed |
| [#4312] add stack check support to kernel | 3 | Closed |
| [#4343] Add direct FB test suite against bf537, bf548 and bf527. | 3 | Closed |
| [#4344] Update DMPC test suite | 3 | Closed |
| [#4345] Run complete regression against MPU kernel. | 3 | Closed |
| [#4347] Automate UART1 test suite on bf537 and bf527 in current regression. UART3 for bf548-ezkit. | 3 | Closed |
| [#4349] Automate G729 test | 3 | Closed |
| [#4350] Automate kgdb over UART test. | 3 | Closed |
| [#4351] Add test suite for L2 SRAM | 3 | Closed |
| [#4353] Automate mplayer test. | 3 | Closed |
| [#4354] Add test for pread64 pwrite64 fadvice64 kernel function | 3 | Closed |
| [#4355] Add ad7183b video input test on bf561-ezkit board. | 3 | Closed |
| [#4356] Add test for user space atomic operation | 3 | Closed |
| [#4359] Add test case for ALSA multichannel Audio output on ad1836 and BF548 | 3 | Closed |
| [#4371] Automate audio test suite | 3 | Closed |
| [#4372] Set up USB garget regression machine for bf52x and bf54x | 3 | Closed |
| [#4373] BF54x / BF52x Rotary Input device driver | 3 | Closed |
| [#4374] ADP5588 QWERTY I2C Keyboard Input device driver | 3 | Closed |
| [#4375] ADP5520 Multifunction LCD Back light and Keypad Input Device Driver | 3 | Closed |
| [#4376] Enable IS1760 USB Host Driver (added mainstream 2.6.26) | 3 | Closed |
| [#4378] Enable framebuffer support for the BF526-EZkit TFT LCD display | 3 | Closed |
| [#4394] Add Support for ADSZ-BF526-EZ-BRD | 3 | Closed |
| [#4418] Change old IDE based CF card test into PCMCIA based. | 3 | Closed |
| [#4422] Extend AD7877 touchscreen controller driver for the AD7879 used on the BFLLCD-EZEXT | 3 | Closed |
| [#4427] Port kernel to bf51x-ezkit | 2 | Closed |
| [#4450] Add GPIO controlled SPI Slave Select support for Blackfin’s SPI Master Driver | 3 | Closed |
| [#4451] extend PPI driver to support arbitrary number of PPIs (like on BF56x/BF54x) | 3 | Closed |
| [#4483] [BFall] Investigate/add CPUSpeed | 3 | Closed |
| [#4525] BF538/9 Linux kernel Support | 3 | Closed |
| [#4537] do IO tests with different schedulers on SPI/NAND/SD/MMC devices | 3 | Closed |
| [#4572] Convert Blackfin GPIO driver to use common gpiolib/gpiochip infrastructure | 3 | Closed |
| [#4580] Add document for SD/SDIO to wiki | 3 | Closed |
| [#4581] Add sound driver doc to wiki | 3 | Closed |
| [#4582] benchmark device driver speed and document in wiki | 3 | Closed |
| [#4590] io{read,write}*_rep functions should use the read/write funcs, not ins/out | 3 | Closed |
| [#4605] Cleanup and unify Blackfin IRQ and GPIO IRQ handling | 3 | Closed |
| [#4641] Port SDIO driver to Bf51x-ezkit | 3 | Closed |
| [#4682] run manual test against BF54x / BF52x Rotary Input device driver | 3 | Closed |
| [#4683] Add manual test for ADP5588 QWERTY I2C keyboard Input device driver | 3 | Closed |
| [#4684] Add test cases agaist framebuffer driver for BFLLCD-EZEXT card on BF526-EZkit | 3 | Closed |
| [#4685] Add test cases agaist ad7879 touch screen driver on BFLLCD-EZEXT card and bf526-ezkit | 3 | Closed |
| [#4686] Setup uclinux regression test against BF538/9 | 3 | Closed |
| [#4687] Setup uclinux regression test against BF51x-ezbrd | 3 | Closed |
| [#4690] Add test suite for ENC28J60 SPI Ethernet MAC on bf537-stamp | 3 | Closed |
| [#4701] make sure ubifs works | 2 | Closed |
| [#4706] merge adeos to arch/blackfin | 3 | Closed |
| [#4718] Update LTP to latest release | 3 | Closed |
| [#4720] improve USB driver performance | 2 | Closed |
| [#4767] Add test cases for USB sound device on bf52x and bf54x | 2 | Closed |
| [#4772] Add bonnie++ test in test scripts | 3 | Closed |
| [#4815] Oprofile test against user application | 3 | Closed |
| [#4822] Add AD1980 audio test for BF527-EZKIT | 3 | Closed |
| [#4870] integrate adeos to 2009R1 release | 3 | Closed |
| [#4910] Build STAMP SPORT Interface cards to emulate UART, SPI, IRDA and to connect ADF70xx-DBx daughter cards. | 3 | Closed |
| [#4954] Add edn test case | 3 | Closed |
| [#4959] make spi-mmc work on BF527 | 3 | Closed |
| [#4971] Automate current manual uboot test cases | 3 | Closed |
| [#4994] Review and Apply Wolfgang's spi mmc patches | 3 | Closed |
| [#5024] add kconfig option for pata data pins | 3 | Closed |
| [#5070] Add test case for xenomai | 3 | Closed |
| [#5118] Add new test cases for ADP5520 Multifunction LCD Back light and Keypad Input Device Driver | 3 | Closed |
| [#5130] Add test cases for user space mem DMA (bfin-dma driver) | 3 | Closed |
| [#5378] Add sdio wifi test case for bf548-ezkit and bf518f-ezbrd | 3 | Closed |
|
| Tracker Name |
Field Name |
Summary |
Priority |
Status Id |
| Bugs | Fixed In Release | [#5633] Power test with ad1836/ad1938, after rtc wake up, audio play error | 3 | Closed |
| [#5698] rtc wake up from standby mode fails on bf537 with adv7393 installed | 3 | Closed |
| [#5700] Build kernel with audio i2s driver as module, kernel fails to build | 3 | Closed |
| [#5836] run spi flash with dma mode enabled fails to mount. | 3 | Closed |
| [#5837] nbench built info fdpic format can't run to the end | 3 | Closed |
| [#6034] Scratchpad application test failed with MPU kernel | 3 | Closed |
| [#6041] Build strace failed at configuration for ioctl in latest trunk | 2 | Closed |
| [#6044] Fail to build kgdb in SMP kernel in trunk | 3 | Closed |
| [#6074] Build bf526 kernel with nand support fail | 3 | Closed |
| Found In Release | [#4090] XIP can't work in flash | 3 | Closed |
| [#4443] bfin nand hangs under pressure on BF548-EZKIT | 3 | Open |
| [#4591] net2272 redefines standard macros like "WARN" | 4 | Closed |
| [#4633] drivers/net/ax88180.c fails in current svn trunk | 3 | Closed |
| [#4764] Kernel prints warning when booting from jffs2 rootfs in nor flash on bf548-ezkit | 5 | Closed |
| [#4766] Kernel Crash: drivers/mmc/host/bfin_sdh.c | 3 | Closed |
| [#4859] netperf-x86 compiling fails with gcc-4.3.2 | 5 | Closed |
| [#4930] USB gadget audio driver play audio not very smoothly on BF527C-EZKIT with SSM2602 audio codec | 3 | Closed |
| [#4943] Bfin SPORT UART driver fails to work when compiled with latest gcc, due to broken inline assembly. | 3 | Closed |
| [#5056] Libertas SDIO / Network - transmit timed out | 2 | Closed |
| [#5072] RTC driver crashes when CONFIG_DEBUG_SHIRQ is set | 3 | Closed |
| [#5076] Run latest kernel in bf518-ezbrd and reboot into uboot, ethernet fails to work | 2 | Closed |
| [#5104] user/blkfin-test/crash_test/traps_test.c lies... | 3 | Closed |
| [#5108] when mpu is on, jump to zero works. | 3 | Closed |
| [#5120] trap_test can double fault and crash the kernel. | 3 | Closed |
| [#5159] boa 120 sec timeout error | 4 | Open |
| [#5164] shell prompt become # on trunk head | 3 | Closed |
| [#5192] run l2 app on bf548 ezkit frequent fails | 3 | Open |
| [#5207] SPI driver fails to build in trunk | 3 | Closed |
| [#5214] trunk applications don't build with trunk toolchain due to missing fork() | 3 | Open |
| [#5236] BF518F-EZBRD fails in linux-2.6.30 due to DSA changes | 3 | Closed |
| [#5237] musb driver is broken after linux-2.6.30 update | 3 | Closed |
| [#5238] bfin_adv7393fb fails to build after linux-2.6.30 upgrade | 3 | Closed |
| [#5239] bfin_timer_latency build fails after linux-2.6.30 upgrade | 3 | Closed |
| [#5240] isp1362-hcd build fails after linux-2.6.30 upgrade | 3 | Closed |
| [#5241] drivers/media/video/blackfin/blackfin_cam.c build fails after linux-2.6.30 upgrade | 3 | Closed |
| [#5242] bfin_sport_spi build fails after linux-2.6.30 update | 3 | Closed |
| [#5243] drivers/net/irda/bfin_sir.c build fails after linux-2.6.30 upgrade | 3 | Closed |
| [#5244] arch/blackfin/kernel/time-ts.c build fails after linux-2.6.30 upgrade | 3 | Closed |
| [#5245] drivers/net/dm9000.c build fails after linux-2.6.30 upgrade | 3 | Closed |
| [#5246] selecting BF_REV_NONE always leads to build error | 3 | Open |
| [#5247] sound/soc/blackfin/bf5xx-{ad1938,tdm}.c build fail after linux-2.6.30 upgrade | 3 | Closed |
| [#5263] kernel BUG()'s when loading modules and CONFIG_MODVERSIONS=y | 3 | Closed |
| [#5266] KGDBOE build fails when NETCONSOLE=n is disabled | 3 | Closed |
| [#5271] insmod sound common layer modules will make system panic after linux-2.6.30 upgrade | 3 | Closed |
| [#5275] i2c-bfin-twi timeout during multibyte block transfers | 3 | Closed |
| [#5277] kgdb self tests fail on do_fork when CTRL+C is hit | 3 | Closed |
| [#5291] crash handler seems to leak memory | 3 | Closed |
| [#5295] New version oprofile like 0.9.4 can not work | 4 | Open |
| [#5313] [ltp] ltp test cases kill05 and kill10 are broken | 4 | Closed |
| [#5316] bonnie++ test fails in bf548-ezkit for atapi | 3 | Open |
| [#5352] bfin_sport.c setup 2D DMA | 3 | Closed |
| [#5360] using nano-x in trunk results in BUG() at mm/nommu.c:531 | 3 | Closed |
| [#5375] using cs 6 with spidev causes kernel panic | 3 | Closed |
| [#5379] run scratchpad case sometimes would fail | 3 | Closed |
| [#5386] bf54x-keys hangs system in trunk | 3 | Closed |
| [#5415] SND:CODEC:SSM2602: Default 40 dB gain overdrives the MICIN circuit | 3 | Closed |
| [#5423] traps_test fails sometimes on bf561-ezkit SMP kernel | 4 | Open |
| [#5448] BF561SMP kernel may can't boot up | 3 | Closed |
| [#5454] testing trunk head toolchain on trunk head kernel would have init make kernel panic | 3 | Closed |
| [#5462] KGDBoE does not appear to work | 3 | Closed |
| [#5464] isram_write() seems to be busted | 2 | Closed |
| [#5466] Kernel badness. | 3 | Closed |
| [#5467] l1 module case fails on trunk head | 3 | Closed |
| [#5468] traps test 20 prefetch l1_instruction fails on trunk head | 4 | Open |
| [#5469] CPU hardly idles anymore in svn trunk | 3 | Closed |
| [#5470] build xenomai fails for no switchbench | 3 | Closed |
| [#5472] Oprofile test fails as hush doesnt seem to pass command line args down | 3 | Closed |
| [#5473] run linphone case on trunk head would have dump info | 3 | Closed |
| [#5475] build mkfs.ubifs on trunk head fails | 3 | Closed |
| [#5476] set panic=3 in bootargs doesn't make kernel reboot when it panics | 3 | Open |
| [#5477] can not enter u-boot in bf518f-ezbrd after reboot from trunk kernel | 3 | Open |
| [#5478] bf518f-ezbrd kernel will hang after running ltp test for some time | 4 | Open |
| [#5481] build kernel image fails for no lib found on trunk head | 3 | Closed |
| [#5484] adv7183 test failed in trunk on bf561-ezkit | 3 | Closed |
| [#5485] usb lan test failed on bf537-stamp and bf561-ezkit | 3 | Closed |
| [#5486] ping size test fails for gadget ethernet test in dma mode | 3 | Closed |
| [#5487] build usb.c fail in testsuites/usbdev/ test at asm/swab.h | 3 | Closed |
| [#5488] Fail to find stroage device node in gadget storage(ram/hd) test with DMA mode | 3 | Closed |
| [#5489] t2/t4 failed in gadget zero bulk test with dma mode | 3 | Closed |
| [#5490] copy mtd.img file to /dev/mtd2 fails | 3 | Closed |
| [#5491] Build bf561 smp kernel failed at mem_map.h | 3 | Closed |
| [#5492] bf538-ezkit kernel boot up with peripheral request error info in SPI driver | 3 | Closed |
| [#5493] module test kernel can not boot up in bf538-ezkit | 3 | Closed |
| [#5494] Run tftlcd test case in bf548-ezkit, kernel crashed at the end | 3 | Closed |
| [#5510] audio test failed on bf527-ezkit with ssm2602 | 3 | Closed |
| [#5512] Kernel crashed at boot up with spimmc driver enabled | 3 | Closed |
| [#5513] g729 test fails in trunk on bf537-stamp | 3 | Closed |
| [#5515] 4 more trap cases fails on bf533 | 3 | Closed |
| [#5519] pushing Blackfin serial resources to boards broke many boards | 2 | Closed |
| [#5521] trunk head build fails at ipc/shm.c | 3 | Closed |
| [#5522] Lib DirectFB-1.4.0 crashes when run DirectFB demo on SVN trunk | 3 | Closed |
| [#5523] Blackfin MUSB build fails after update to 2.6.31 | 3 | Closed |
| [#5524] drivers/video/bfin_adv7393fb.c build fails in 2.6.31 due to old i2c usage | 3 | Closed |
| [#5525] drivers/video/bf537-lq035.c build fails in 2.6.31 due to old i2c usage | 3 | Closed |
| [#5526] ip0x board has broken UART defines after resource reorganization | 3 | Closed |
| [#5527] drivers/media/video/blackfin/blackfin_cam.c build fails in 2.6.31 due to old i2c usage | 3 | Closed |
| [#5528] fs/binfmt_elf_fdpic.c build fails when CONFIG_ELF_CORE is enabled in 2.6.31 | 3 | Closed |
| [#5529] arch/blackfin/kernel/ftrace.c fails in 2.6.31 | 3 | Closed |
| [#5530] build kernel fails at strace in trunk | 3 | Closed |
| [#5532] request PJx on BF537 will cause buffer overflow | 3 | Closed |
| [#5534] run aplay/arecord will make system panic after kernel upgraded to 2.6.31 | 3 | Closed |
| [#5537] bfindma test failed in latest trunk | 3 | Closed |
| [#5538] kernel failed to wake up in bf538-ezkit in latest trunk | 3 | Closed |
| [#5543] SMP kernel crashed when booting | 3 | Closed |
| [#5546] For bf537-stamp, latest kernel fails to build at bfin_mac | 3 | Closed |
| [#5547] kernel fails to boot up at 350 cclk and 70 sclk on bf518f ezkit | 3 | Closed |
| [#5548] Application speaker-test will cause kernel crash | 3 | Closed |
| [#5549] Build default bf537 kernel fails at ad73322 driver in latest trunk | 3 | Closed |
| [#5550] fail to flash ubifs.img to nand | 3 | Closed |
| [#5554] cat /proc/mtd doesn't always show ubifs partitions | 3 | Closed |
| [#5556] kernel crashes with tickless config | 3 | Closed |
| [#5557] run bonnie++ on ide harddisk has timeout | 3 | Open |
| [#5558] bfin mac multi-cast sending fails to work | 3 | Closed |
| [#5559] Read ITEST_COMMAND via debugfs mmrs will cause kernel crash | 3 | Closed |
| [#5560] build kernel for bf518f ezbrd fails at net/bfin_mac.c now | 3 | Closed |
| [#5561] [ltp ]Kernel dump info when run ltp test cases access02, chown03, fchmod06, fchown03, fchown04 | 3 | Closed |
| [#5562] [ltp]some ltp test case is broken for getipckey and getcwd | 3 | Closed |
| [#5563] Some ltp test case will get warning of "Directory not empty" | 3 | Closed |
| [#5564] kgdb test over extended uart can't stop at breakproint | 3 | Closed |
| [#5566] kerrnel crashes with certain console settings | 3 | Closed |
| [#5567] build nand for bf537 fails on trunk | 3 | Closed |
| [#5570] reboot on bf527-ezkit with nand and ubifs enabled fails | 3 | Closed |
| [#5572] kernel with usb isp1761 crash in trunk | 3 | Closed |
| [#5573] Kernel can not wake up from interrupt of ethernet | 3 | Closed |
| [#5574] adv7393 driver doesn't work in trunk now on bf537-stamp | 3 | Closed |
| [#5575] make vmImage would include rootfs | 3 | Closed |
| [#5577] copy from target to host through serial uart0 has chars distorted | 3 | Closed |
| [#5578] boot up kernel on bf533 stamp fail and panic | 3 | Closed |
| [#5579] console output abnormal on bf537 stamp | 3 | Closed |
| [#5580] GPIO pin not reserved for CTS function on SPORT-UART driver | 3 | Closed |
| [#5581] trunk head build fails for get_fb_unmapped_area undefined when framebuffer is built as a module | 3 | Closed |
| [#5582] trunk head kernel fails to boot on bf561 ezkit | 2 | Closed |
| [#5583] build trunk head kernel would stops at making romfs sometimes | 3 | Closed |
| [#5588] build adp5520 kernel fails | 3 | Closed |
| [#5592] malloc performance test always fails now | 3 | Closed |
| [#5593] fail to build kernel with module AD1836 and AD1938 | 3 | Closed |
| [#5595] Run earlyprintk test on bf538-ezkit, kernel fails to boot up | 3 | Closed |
| [#5596] Fail to boot up 561 SMP kernel for latest regression | 3 | Closed |
| [#5597] Build mmap_test fails | 3 | Closed |
| [#5598] bluez-utils has parallel build issues with parser.h | 3 | Closed |
| [#5601] Remove blackfin_cam module will make kernel hang for VS6624 and adv7183 | 3 | Closed |
| [#5603] For sdio mmc on bf518f/bf548, operation on SD card takes too long time | 3 | Closed |
| [#5605] Build bf537-stamp fail at bf5xx-i2s.c in latest trunk | 2 | Closed |
| [#5610] DMA Channel 14 failed to suspend in mem in bf527 with lcd module installed | 3 | Closed |
| [#5614] With latest toolchain in trunk, fail to build some apps and libs at fork | 3 | Closed |
| [#5616] Unable to patch kernel 2.6.31.3 with adeos-bfin.patch | 3 | Closed |
| [#5618] Kernel fails to build at bfin_mac.c in latest trunk | 2 | Closed |
| [#5619] isp1760 module doesn't work on latest trunk | 3 | Closed |
| [#5620] Build twi_test failed as kernel updated in latest trunk | 3 | Closed |
| [#5622] BF548 can not wake up from standby by uart interrupt | 3 | Closed |
| [#5625] Build microwin app fails in trunk with 4.3 toolchain | 3 | Closed |
| [#5626] Build lib mad fail at option "-fforce-mem" with gcc 4.3 | 3 | Closed |
| [#5627] fail to control gpio used by led and button through /sys/class/gpio/ | 3 | Closed |
| [#5628] g729 test crashed on bf548/bf527 with gcc 4.3 toolchain | 3 | Closed |
| [#5629] Coreb test failed due to kernel update | 3 | Closed |
| [#5630] ethernet driver smc91x fail to wake up by uart in bf533-stamp | 3 | Closed |
| [#5631] Build lib confuse failed with gcc 4.3 toolchain | 3 | Closed |
| [#5633] Power test with ad1836/ad1938, after rtc wake up, audio play error | 3 | Closed |
| [#5635] OOM in trunk causes a double fault in trace decoding | 3 | Closed |
| [#5636] generic gpio works on bf533 in the opposite way | 3 | Closed |
| [#5637] Kernel crashed when arecord and aplay on bf537-stamp with SoC I2S audio | 3 | Closed |
| [#5638] i2ctwi test fails on bf537 stamp | 3 | Closed |
| [#5640] It frequently fails to initialize BCSP with bluetooth EZ-Extender | 3 | Closed |
| [#5647] SPI driver bus_unlock() does not schedule postponed SPI messages | 3 | Closed |
| [#5649] xip test fail as app fail to execute in NOR flash | 3 | Closed |
| [#5650] Fail to open video device node of camera vs6624 on bf537-stamp | 3 | Closed |
| [#5651] Build lirc failed at missing files | 3 | Closed |
| [#5652] run strace fails for fork: Function not implemented | 3 | Closed |
| [#5653] Error happens when play audio with ssm2603 on bf527-ezkit | 3 | Closed |
| [#5654] Gadget audio test failed on bf527-ezkit with ssm2603 add-on card | 3 | Open |
| [#5655] ppifcd test case doesn't work with generic gpio | 3 | Closed |
| [#5656] Build iproute2 fails at trunk for dlfcn.h when built as FLAT | 3 | Closed |
| [#5657] [ltp] ltp test case mount03/umount03 fail with error of "No such device" | 3 | Closed |
| [#5658] [ltp] ltp test case umount02 fail with kernel dump info | 3 | Closed |
| [#5659] [ltp] ltp test case eventfd01 fail | 3 | Closed |
| [#5662] Uncached DMA region no longer being uncached | 2 | Closed |
| [#5663] Build latest kernel fail at physmap | 3 | Closed |
| [#5665] Build kernel fails when adau1761 is built as module | 3 | Closed |
| [#5668] Fail to build app bluez-utils | 3 | Closed |
| [#5674] traps test 21 prefetch _l1_no fails on trunk head On bf548 and bf518 and bf527 | 3 | Closed |
| [#5676] mpu kernel fail to build on trunk | 3 | Closed |
| [#5678] ptpd would switch from master to slave status if there is another machine set to master in the lan | 4 | Open |
| [#5683] build nand fails for format error | 3 | Closed |
| [#5684] touching keypad on bf548 will make system dead and restart | 3 | Closed |
| [#5687] SPI read/write be wrong after suspend to memory and resume | 3 | Open |
| [#5689] while two or multi spi devices use gpio cs, spi setup will fail | 3 | Open |
| [#5690] debug smp kernel using gdb, single step would crash the kernel | 3 | Open |
| [#5694] build fails in bf548-ezkit for latest trunk | 3 | Closed |
| [#5695] Build bf537-stamp fails at ad73322 for the latest trunk | 3 | Closed |
| [#5696] rtc wake up from mem mode fails on bf518f-ezbrd | 3 | Closed |
| [#5698] rtc wake up from standby mode fails on bf537 with adv7393 installed | 3 | Closed |
| [#5699] run linpone on trunk head has dump info | 3 | Open |
| [#5700] Build kernel with audio i2s driver as module, kernel fails to build | 3 | Closed |
| [#5702] build xenomai into fdpic format fails for no libnative.so | 3 | Open |
| [#5704] fail to xip_test on bf537-stamp mpu kernel | 2 | Closed |
| [#5705] build default kernel with fdpic app fails to boot up on bf533 stamp sometimes | 3 | Closed |
| [#5708] Kernel can not boot up when spimmc driver is interrupt drivern in PIO mode | 2 | Closed |
| [#5712] I2C client drivers using dev_pm_ops fail to receive suspend/resume callbacks | 3 | Closed |
| [#5719] SVN trunk MPU kernel panics when boot from a xip root romfs in nor flash on bf537 0.3 | 2 | Closed |
| [#5721] Sometimes kernel locks while accessing SPI devices | 2 | Open |
| [#5722] bfin_sport_spi broken by cs_gpio changes | 3 | Closed |
| [#5725] netperf running on bf548-ezkit relatively slower that before | 3 | Open |
| [#5727] build e2fsprogs-1.41.12 fail sometimes because of compiling order | 3 | Closed |
| [#5729] Generate file to sdio mmc on bf548-ezkit will get error message sometimes | 3 | Closed |
| [#5735] A SMP sync problem may lead to timers on core B not working | 3 | Closed |
| [#5738] Linux Blackfin arch is missing __cmpdi2 | 3 | Closed |
| [#5739] Blackfin serial dma is wonky after 2.6.32 upgrade | 3 | Closed |
| [#5740] convert clocksource to cyclecounter | 4 | Open |
| [#5741] adau1371 and adau1761 fail to build after 2.6.32 upgrade | 3 | Closed |
| [#5742] outdated TIF (thread_info.h) bits in 2.6.32 | 3 | Closed |
| [#5743] sound/soc/blackfin/bf5xx-ad1938.c build fails after 2.6.32 upgrade | 3 | Closed |
| [#5744] trunk head kernel stucks after booting up now | 3 | Closed |
| [#5745] A SMP cache coherence may lead to kernel boot failure | 3 | Open |
| [#5746] Fail to build kernel at application strace after kernel is updated | 2 | Closed |
| [#5747] Fails to build smp kernel on bf561-ezkit for latest trunk | 3 | Closed |
| [#5748] serial is very slow and can lose char when enabling DMA and MPU in trunk head on BF537 | 3 | Closed |
| [#5750] SMP build fails with 2.6.32 due to missing dynamic percpu support | 3 | Closed |
| [#5752] Build some kernel failed at .tmp_vmlinux2 in latest trunk | 3 | Closed |
| [#5753] Fail to apply xenomai to latest trunk kernel | 3 | Closed |
| [#5754] Error occurs when write to SD card with spimmc in kernel trunk | 3 | Closed |
| [#5762] bfin SocketCAN can't send and receive packets in trunk head | 3 | Closed |
| [#5763] make config for trunk head kernel with script fails at Atmel SD/MMC Driver for mismatch | 3 | Closed |
| [#5770] trunk head kernel built with 4.3 trunk head toolchain for bf548 ezkit boot stuck at sda | 3 | Closed |
| [#5783] sport uart test fails to receive data on bf537 0.3 stamp board | 3 | Closed |
| [#5792] enc28j60 spi net fails to ping with host on trunk head kernel | 3 | Closed |
| [#5793] bf561 smp: kernel panic if enabling high resolution timer | 3 | Closed |
| [#5795] adxl through SPI is too sensitive on trunk head kernel | 3 | Closed |
| [#5799] Build qt fails at debug-mmrs.c in latest trunk | 3 | Closed |
| [#5800] Build strace fails at one regression machine with SuSE 9.3 | 3 | Closed |
| [#5803] kgdb fails to connect on trunk head kernel | 3 | Closed |
| [#5805] load library like libosipparser2.so.4 sometimes fails on trunk head built by gcc 4.3 | 2 | Open |
| [#5806] mmc device node can not generated correctly after partition | 3 | Closed |
| [#5807] traps test case fails for wrong EXCAUSE on trunk head kernel | 3 | Closed |
| [#5808] mmc configuration error in make config | 3 | Closed |
| [#5810] initial sp is given wrong value and INIT_TASK_DATA is not linked into data | 3 | Closed |
| [#5811] Directfb test application can not exit properly on bf548-ezkit | 4 | Open |
| [#5812] Build latest kernel fail at tmp_vmlinux1 | 3 | Closed |
| [#5813] Gadget serial tests will make kernel crash | 3 | Closed |
| [#5817] lmbench test fails sometimes on bf561-ezkit SMP kernel | 3 | Closed |
| [#5818] Get kernel dump info when test mmap1 in bf537-stamp mpu kernel | 3 | Closed |
| [#5819] oprofile and g729 kernel can not boot up in latest trunk | 3 | Closed |
| [#5820] Can not find sound card ad1836 on bf533-stamp in trunk | 3 | Closed |
| [#5821] Fail to build pngview on regression machines with suse 10.2 | 3 | Closed |
| [#5823] ffmpeg fails to run in trunk due to libswscale.so | 3 | Closed |
| [#5824] some kernel modules fail to link due to losing strcpy in trunk head | 3 | Closed |
| [#5831] set the performance register in kdgb testing fails | 3 | Closed |
| [#5832] sport control over ad73311 chip has status error: TUVF | 3 | Closed |
| [#5833] trap test running on the second core of bf561 has serveral fails | 3 | Closed |
| [#5834] Build bf537-stamp mpu kernel for kernel xip test failed | 3 | Closed |
| [#5836] run spi flash with dma mode enabled fails to mount. | 3 | Closed |
| [#5837] nbench built info fdpic format can't run to the end | 3 | Closed |
| [#5838] XIP kernel hangs during boot up in latest trunk | 3 | Closed |
| [#5839] Build kernel fails at time-ts.c for latest trunk | 3 | Closed |
| [#5841] [ltp] ltp test case shmctl01/semctl01 can not execute | 3 | Open |
| [#5844] Gadget serial dirver test fail when transfer a file | 3 | Open |
| [#5848] "kernel memory" shows up wonky with ROM kernel in cpuinfo | 4 | Open |
| [#5849] [LTP] ltp test case shmat02 and kill05 failed at attaching shared memory | 3 | Closed |
| [#5850] [LTP] ltp test case kill07 failed with kernel dump info of illegal use of supervisor resource | 3 | Closed |
| [#5851] device nodes are not created as soon as they are use to be | 3 | Closed |
| [#5852] enabling bfin_mac and bfin_nand on bf526-ezbrd leads to NULL pointer crash | 3 | Closed |
| [#5871] No mtdblock is generated on bf533-stamp during xip test | 3 | Closed |
| [#5872] Fail to run alsa application with BF527-EZKIT ssm2603 | 3 | Closed |
| [#5873] Trunk kernel crashed when testing bonnie++ for usb1761 driver | 3 | Closed |
| [#5874] malloc performance frequently fails on bf561 SMP kernel | 3 | Closed |
| [#5875] adxl through I2C fail now on trunk head kernel | 3 | Closed |
| [#5879] GPIO controlled slave request may fail when bfin_spi_setup() gets executed twice | 3 | Closed |
| [#5896] trunk head kernel build fail for lack of linux/regulator/adp_switch.h | 3 | Closed |
| [#5898] build strace fails on trunk head kernel | 3 | Closed |
| [#5899] change cpu freq on 561 smp kernel doesn't change Calibration values | 3 | Closed |
| [#5900] hardware single stepping in userspace does not handle syscalls correctly | 3 | Closed |
| [#5902] reading /proc/bus/usb/devices on BF548-EZKIT in OTG mode results in crash | 3 | Closed |
| [#5904] trunk kernel fails to run gdb testing | 3 | Closed |
| [#5920] mke2fs fails to create a valid file system | 2 | Closed |
| [#5923] trunk toolchain hardware testing with trunk head kernel fails at libstdc++ | 3 | Closed |
| [#5924] Scheduling error shows up sometimes in latest trunk | 4 | Open |
| [#5925] access_ok is called in atomic contexts in blackfin | 3 | Open |
| [#5930] Fail to run bfin_opcontrol in flat format after update toolchain to svn3815 | 3 | Closed |
| [#5933] BF561-EZKIT SMP kernel can not wake up from standby mode by uart interrupt | 2 | Closed |
| [#5934] Attach uart based bluetooth HCI failed on bf537-stamp with ADZS-BFBLUET-EZEXT | 3 | Closed |
| [#5939] bfin-can fails to build after linux-2.6.33 upgrade | 3 | Closed |
| [#5940] lynx fails in trunk due to using fork() | 3 | Open |
| [#5941] links fails in trunk due to using fork() | 3 | Open |
| [#5942] build usb host fail when remove anomaly 456 for BF526-EZBRD | 3 | Closed |
| [#5943] Build latest kernel will fail after make clean | 3 | Closed |
| [#5944] Disable anomaly 456 for bf526-ezbrd, gadget fs bulk test fails in dma mode | 5 | Open |
| [#5945] Gadget ethernet fails to work in dma mode when anomaly 456 is disabled on bf526-ezbrd | 3 | Open |
| [#5946] Disable anomaly 456 on bf526-ezbrd, gadget serial in dma mode fails to work | 3 | Open |
| [#5947] Disable anomaly 456 on bf526-0.2-ezbrd, host can't find gadget ram storage in dma mode | 3 | Open |
| [#5948] Disable anomaly 456 on bf526-ezbrd, gadget zero bulk test fails for dma mode | 3 | Open |
| [#5949] Sometimes kernel panics when transfer data between gadget serial and host pc | 3 | Open |
| [#5951] ADAU ASoC drivers fail to build after linux-2.6.33 upgrade | 3 | Closed |
| [#5952] Build latest kernel fail at bfin_can.c | 3 | Closed |
| [#5955] Build bf561-ezkit SMP kernel fails at bfin_ksyms.o | 2 | Closed |
| [#5956] Can not detect usb host storage with usb otg driver | 3 | Closed |
| [#5958] Kernel xip failed on bf527-ezkit with FDPIC format | 3 | Closed |
| [#5960] trunk head kgdb test fails to continue | 3 | Closed |
| [#5961] It takes longer time to exit from fdisk during gadget storage test | 3 | Open |
| [#5963] gadget zero control may hang at test 14 in latest trunk | 3 | Closed |
| [#5964] gadget zero bulk may hang at test 13 in latest trunk | 3 | Open |
| [#5967] nand on bf537-stamp board fails to get found when booting up | 3 | Closed |
| [#5971] data flash partition size doesn't match with setting | 3 | Closed |
| [#5973] trunk head kernel would panic when testing trunk head toolchain now | 2 | Closed |
| [#5975] kernel boots up on bf533 stamp shows spi flash partition info without externel spi flash on | 3 | Closed |
| [#5976] Screen color is blue or red in microwin test | 3 | Closed |
| [#5977] adv7393 power test failed in both standby and mem mode | 3 | Closed |
| [#5978] Load isp1362-hcd error in latest trunk | 3 | Closed |
| [#5979] gadget fs bulk test may hang at test 7 | 3 | Open |
| [#5983] BF561-EZKIT SMP kernel fail to boot up when preempt is enabled | 3 | Closed |
| [#5984] Build kernel failed with ad1938 in latest trunk | 3 | Closed |
| [#5986] Run userspace xip test in fdpic format on bf537-stamp, whole file system is in flash, kernel prompt error | 3 | Closed |
| [#5987] Can not detect spimmc when ad1836 is also installed on bf537-stamp | 3 | Closed |
| [#5991] trap test on bf518 would make kernel panic at case of Stack set to L1 instruction | 3 | Closed |
| [#5992] bfin-mac driver randomly crashing... | 3 | Closed |
| [#6002] Can not detect ad1836 on bf533-stamp in latest trunk | 3 | Closed |
| [#6003] Traps test 43/45/47/49 fails on bf533-stamp/ezkit | 3 | Open |
| [#6005] Can not record and play at the same time for ad1938 in latest trunk | 3 | Closed |
| [#6006] For adau1371, record and play at the same time, sometimes it fails to exit | 3 | Closed |
| [#6010] Test ssm2603 on bf537-ezkit, sometime alsa application can not exit | 3 | Open |
| [#6011] Write to nand hangs when doing ps periodicly | 3 | Open |
| [#6019] Build default kernel fail at libpng-1.2.42 for zlib | 2 | Closed |
| [#6024] Kernel xip failed to build due to strncpy calling memcpy in assembly | 3 | Closed |
| [#6025] ssm2603 fails to work with vrec/vplay | 3 | Closed |
| [#6026] play and record with adau1361 will fail sometimes | 3 | Open |
| [#6027] On adau1361, one channel of recorded audio is too small | 3 | Closed |
| [#6029] ad1939 board sometimes fails to work | 3 | Closed |
| [#6033] traps test case 93 will make kernel panic on bf526 when stack set to L1 instruction | 3 | Open |
| [#6034] Scratchpad application test failed with MPU kernel | 3 | Closed |
| [#6040] Build kernel with usbotg failed | 3 | Closed |
| [#6041] Build strace failed at configuration for ioctl in latest trunk | 2 | Closed |
| [#6043] building KGDBOE as module in trunk fails | 3 | Open |
| [#6044] Fail to build kgdb in SMP kernel in trunk | 3 | Closed |
| [#6047] Kernel can not wake up from mem in latest trunk | 3 | Closed |
| [#6049] page write/read flow is wrong in bfin nand driver | 3 | Closed |
| [#6051] Can not find pcmcia device in /proc/devices for cfcard test | 3 | Closed |
| [#6052] arecord fails sometimes with adau1373 | 3 | Open |
| [#6053] Lmbench test crashed sometimes on bf527-ezkit | 3 | Closed |
| [#6054] ecc correct fail to work after split nand page into several 512 bytes subpage | 3 | Closed |
| [#6055] Build bf561-ezkit SMP kernel failed at anomaly 05000491 | 3 | Closed |
| [#6056] Build bf538-ezkit fail at bfin_gpio.c | 3 | Closed |
| [#6057] Kernel crashed with slob configuration | 3 | Open |
| [#6060] Build ADIS16209 fail at ring_sw.c | 3 | Closed |
| [#6061] Fail to build kernel with nand on bf527-ezkit | 3 | Closed |
| [#6070] can't access scratchpad sram in bfin-uclinux-gdb in MPU | 3 | Closed |
| [#6071] Default bf548-ezkit kernel config is wrong for sdio MMC driver | 2 | Closed |
| [#6072] error: ‘BTN_TOOL_QUADTAP’ undeclared while compiling the Kernel | 3 | Closed |
| [#6074] Build bf526 kernel with nand support fail | 3 | Closed |
| [#6075] reading USB_EP_NI7_RXINTERVAL via debug mmr sysfs results triggers a System MMR | 3 | Open |
| [#6077] AD183X fails to detect on BF561-EZKIT | 3 | Open |
| [#6106] adp5588-gpio sometimes fails as a module | 3 | Closed |
| [#6108] Read SPORT0_TX via debugfs mmrs will cause kernel crash on bf561-ezkit | 4 | Closed |
| [#6109] Read USB_PHY_TEST via debugfs mmrs will cause kernel crash on bf527/bf526/bf548 | 4 | Open |
| [#6110] Read RSI_STATUSCL via debugfs mmrs will cause kernel crash on bf518-ezbrd | 4 | Closed |
| [#6111] Read SPT1_TX via debugfs mmrs will cause kernel crash on bf533 | 4 | Closed |
| [#6112] Wrong DMA word size defined in adv7183b driver for bf548. | 3 | Closed |
| [#6113] Wake up through ethernet fail when I boot up kernel step by step in uboot | 3 | Closed |
| [#6136] Illegal i2c bus lock upon certain transfer scenarios | 2 | Open |
| [#6147] kernel crash with none dma usb host hci | 3 | Closed |
| [#6148] USB detection will cause kernel crashing at mm/slab.c | 3 | Closed |
| [#6150] Build usbotg kernel fail in latest trunk | 3 | Closed |
| [#6151] ADXL34x accelerometer has no response in trunk | 3 | Closed |
| [#6154] connection refused when play sound in the bluetooth ALSA testing | 3 | Open |
| [#6155] USB device descriptor read error when test bluetooth on USB | 3 | Open |
| [#6166] can't reboot kernel successfully when test bluetooth cf | 3 | Closed |
| [#6168] kernel autoboot when i input "hciconfig hci0 up" in bluetooth cf testing | 3 | Closed |
| [#6170] section mismatches in cifs code | 3 | Open |
| [#6172] Build kernel with xenomai failed at hal.h after kernel upgrade | 3 | Closed |
| [#6173] linphone testing problem | 3 | Closed |
| [#6174] When remove a CF card in PCMCIA test, "START_STOP FAILED" shows | 4 | Open |
| [#6175] 502 Bad Gateway in the netaudio testing | 3 | Closed |
| [#6176] error happend when test tftlcd | 3 | Closed |
| [#6178] rsh no longer works in trunk | 3 | Closed |
| [#6180] Build directfb with bf527-ezkit-v2 board config, application fails to run | 3 | Closed |
| [#6181] Traps test may fail at Read of L1 instruction on bf548-ezkit | 3 | Closed |
| [#6182] console can't see anything after some time in BFLLCD and touchscreen testing | 4 | Open |
| [#6184] can't regonize the usb when our blackfin as host side in usbotg testing on BF527-EZKIIT | 3 | Closed |
| [#6185] gadget_fs test makes kernel panic in latest trunk | 3 | Open |
| [#6187] Kernel crashed when boot from jffs2 file system with bf561-ezkit SMP | 3 | Open |
| [#6189] Kgdb test may fail on bf561-ezkit SMP kernel | 3 | Open |
| [#6190] BF561-EZKIT SMP kernel can not wake up by uart | 3 | Open |
| [#6191] Traps test may fail at Stack set to non-existant L1 on bf538-ezkit | 3 | Open |
| [#6192] Traps test may fail at Read of L1 instruction on bf538-ezkit | 3 | Open |
| [#6193] ad73311 fails to work in trunk | 3 | Open |
| [#6194] libxenomai.so.0 can't be found in xenomai kernel with fdpic mode | 3 | Closed |
| [#6195] Build xenomai kernel fail with shared_flat format in trunk | 3 | Open |
| [#6196] I2C keypad driver testing over GPIO,when press 'B',it show 't'.other charactes show rightly. | 3 | Closed |
| [#6197] can't regonize lcd device in i2c lcd driver testing over GPIO | 3 | Closed |
| [#6198] syntax error in the netaudio testing | 3 | Open |
| [#6199] 527ezkit-v2 board as device side can't work well in the usbotg testing | 3 | Closed |
| [#6200] I2C keypad driver testing over twi,when press 'B',it show 't'.other charactes show rightly. | 3 | Closed |
| [#6201] can't regonize lcd device in i2c lcd driver testing over twi on bf548-ezkit | 3 | Closed |
| [#6203] error on bf533-stamp in ppifcd testing, while on bf537-stamp is well. | 3 | Closed |
| [#6205] In Capacitance Touch testing, when touch board ,nothing show. | 3 | Open |
| [#6206] no input device in ADP5588 testing on BF537-STAMP. | 3 | Closed |
| [#6207] Build error in CTS/RTS testing on board BF548-EZKIT | 3 | Closed |
| [#6208] system can't receive button status normally or correctly in pfbutton testing on board bf537-stamp. | 3 | Open |
| [#6213] i2c lcd driver testing on bf537, can't say some rdac files in 0-002f folder | 3 | Closed |
| [#6215] Failed to probe AD7877 Touchscreen when test touchscreen over spi on bf527-ezkit-2.0 | 3 | Open |
| [#6216] can't probe lcd device in i2c lcd driver testing on board bf527-ezkit-rev2.0 | 3 | Open |
| [#6217] oscilloscope can't show the wave rightly when awg generate wave on board BF537-STAMP | 3 | Open |
| [#6218] In sport emulate spi testing, can't see square wave through network oscilloscope(ndso) on target board BF537_STAMP | 3 | Open |
| [#6219] In irda bfin_sir driver testing on board BF537-STAMP, the board irda can't discover the pc irda while pc can discover blackfin. | 3 | Open |
| Ongoing Work | Scheduled for Release | [#3096] Modification of ad1836a driver for dual card use (sport0 and sport1) | 3 | Closed |
| [#3704] SPORT UART: use common infrastructure | 3 | Closed |
| [#3707] Network Driver for ADF7020/21 ISM Narrow-Band Single Chip Transceiver ICs | 3 | Closed |
| [#3863] Run uClinux with limited memory (<8MB) | 3 | Closed |
| [#3864] Measure overhead of Linux kernel, document performance data in wiki | 3 | Closed |
| [#3879] port Blackfin CAN driver to new CAN framework | 3 | Closed |
| [#3935] Update kernel PREEMPT_RT patch on blackfin arch | 2 | Open |
| [#3979] implement support for STACKTRACE | 3 | Closed |
| [#4013] update gnu/inetutils to latest... | 3 | Open |
| [#4096] Switch to use generic ptrace functions for blackfin arch | 3 | Closed |
| [#4169] New test suite to checkout souce, build toolchain, uboot, kernel and boot linux on new colinux release | 3 | Closed |
| [#4274] reset POLAR setting when acquiring a gpio for the first time | 3 | Closed |
| [#4275] Make SPI interrup driven in PIO mode | 3 | Closed |
| [#4303] Set up kernel regression machine to test kernel with ADEOS | 3 | Closed |
| [#4437] XIP: add support for kernel in parallel flash | 3 | Closed |
| [#4599] add test case for SPI flash with DMA and PIO | 3 | Closed |
| [#4617] Blackfin dma-mapping.h lacks dma_set_mask() / dma_supported() functions | 3 | Closed |
| [#4628] investigate RS-485 support | 3 | Closed |
| [#4642] bf51x IEEE 1588 driver | 2 | Closed |
| [#4676] Evaluate gprof features to profile user application. | 4 | Closed |
| [#4699] convert smc91x to platform data | 4 | Closed |
| [#4719] support Micrel Switch with VLAN and NAT on bf51x | 3 | Closed |
| [#4788] bf561 coreb dsp framework driver | 2 | Open |
| [#4796] add support for nmi_watchdog on BF561 smp | 3 | Closed |
| [#4863] add support for preempt | 3 | Closed |
| [#4906] validate shm/ipc works on bf561 smp | 3 | Closed |
| [#4926] verify suspend-to-ram works on bf561 smp | 3 | Closed |
| [#4935] Add lockbox support in kernel for bf54x and bf52x | 3 | Closed |
| [#5019] Design and build EIA RS-485 STAMP Add-On-Cards | 3 | Closed |
| [#5057] Enable ad1938 sound driver in kernel | 3 | Closed |
| [#5081] Add workaround comments for anoamly 05000099 in bfin_5xx.c in POLL code | 3 | Closed |
| [#5082] work around anomaly 05000119 in spi_bfin5xx.c | 3 | Closed |
| [#5083] Add workaround comments for anomaly 05000120 in file where SMP global lock is defined. | 3 | Closed |
| [#5084] work around 05000149 in coreb driver for bf561 | 3 | Closed |
| [#5085] workd around anomaly 05000231 in bfin_5xx.c | 3 | Closed |
| [#5086] Add wordaround comments for anomaly 05000215 in bfin_5xx.c PIO tx function | 3 | Closed |
| [#5088] add workaround comments to anomaly 05000456 in musb.c or Kconfig | 3 | Closed |
| [#5089] add workaround comments to anomaly 05000450 in MUSB driver | 3 | Closed |
| [#5090] add workaround comments for 05000187 in bfin_dma_5xx.c func __dma_memcpy() | 3 | Closed |
| [#5091] work around anomaly 05000220 to allow WT cache only. | 3 | Closed |
| [#5093] work around anomaly 05000250 in ad1836 driver TDM mode. | 3 | Closed |
| [#5094] work around anomaly 05000274 to check if SCLK_DIV > CCLK_DIV *2 at compile time. | 3 | Closed |
| [#5095] work around 05000287 in mach-common/entry.S by and DMEM_CONTROL with 0x3000 | 3 | Closed |
| [#5096] workaround anomaly 05000301 in /dev/bfin-dma driver | 3 | Closed |
| [#5100] add test case for dumping of debugfs MMR tree | 3 | Closed |
| [#5102] Design and build STAMP PPI Connector CPLD Interface Cards | 3 | Closed |
| [#5103] Design CPLD logic to interface an 8-bit PPI to 16/18-bit TFT LCD | 3 | Closed |
| [#5115] work around anomaly 05000400 in LCD framebuffer drivers | 3 | Closed |
| [#5116] work around anomaly 05000254 in bfin_ppi | 3 | Closed |
| [#5117] word around anomaly 05000179 in bfin_ppi | 3 | Closed |
| [#5127] Rewrite ad1836 driver based on SOC framework | 3 | Closed |
| [#5128] Update ADEOS/Xenomai to latest release. | 3 | Closed |
| [#5146] Develop Linux driver for ADXL345/346 Three-Axis Digital Accelerometers | 4 | Closed |
| [#5155] Implement MUX bits lock funtion in blackfin gpio layer for BF518 like processor | 3 | Open |
| [#5166] convert to GENERIC_HARDIRQS_NO__DO_IRQ | 3 | Closed |
| [#5167] convert enc28j60 to set_irq_type() | 3 | Open |
| [#5173] extend Blackfin GPIO API to include BF51x/BF52x extended features | 2 | Closed |
| [#5193] BF538/9 PORT C,D,E GPIO support | 3 | Closed |
| [#5199] musb: review lkml feedback on usb ping patch | 3 | Closed |
| [#5200] musb: review lkml feedback on usb gadget endpoint patch | 3 | Closed |
| [#5209] unused variables in blackfin/kgdb.c | 3 | Closed |
| [#5231] verify new FLAT alignment code works | 3 | Closed |
| [#5273] Add driver for AD7147 board (cap sense) | 2 | Closed |
| [#5344] convert the spi ADC/DAC Demo apps to use the generic SPORT driver instead. | 3 | Open |
| [#5345] Convert simple PPI frame captures demo to use bfin_ppi driver | 3 | Closed |
| [#5346] convert sl811 ISOCHRONOUS mode into Kconfig option | 3 | Closed |
| [#5347] make sure the SMP internals are initialized early so we dont have to change random drivers. | 3 | Closed |
| [#5353] replace bfin_timer_latency driver with tracing framework | 2 | Closed |
| [#5356] LKML feedback for ad7142 driver | 3 | Closed |
| [#5359] Blackfin arch implement ndelay() | 3 | Closed |
| [#5387] Support OTG mode in blackfin onboard USB driver | 3 | Closed |
| [#5409] Merge hwmon/ad5252 into ad5258 driver | 3 | Closed |
| [#5433] implement cpu frequency on blackfin SMP | 3 | Closed |
| [#5443] New driver for Low-Power CODEC with Speaker and Headphone Amp ADAU1371 | 2 | Closed |
| [#5455] gpiochip driver for adp5588 GPIO expanders | 3 | Closed |
| [#5456] Run LTP high resolution timer test cases | 3 | Closed |
| [#5457] Add test suite to run LTP under preempt kernel. | 3 | Closed |
| [#5459] Add test suite to wake up core by uart rx interrupt. | 3 | Closed |
| [#5474] Add test suite for ubifs on NAND flash | 3 | Closed |
| [#5480] Add test case for FDPIC and shared-flat XIP app in NOR flash. | 3 | Closed |
| [#5495] Enable ssm2602/2603 test on bf533/bf537/bf527/bf548 | 3 | Closed |
| [#5497] test test suite against capacitor adc AD714x | 3 | Closed |
| [#5498] Add test for Core B DSP framework | 3 | Open |
| [#5499] add test suite for ieee 1588 ptp | 3 | Closed |
| [#5500] Convert test suite for simple gpio to kernel generic GPIO | 3 | Closed |
| [#5501] Run Linphone test against ssm2603 | 3 | Closed |
| [#5502] Run multichannel audio ALSA test against ad1938 | 3 | Closed |
| [#5503] Add test cases for interrupt drivern spimmc driver in PIO mode | 3 | Closed |
| [#5504] Add test cases for XIP kernel in NOR flash | 3 | Closed |
| [#5505] Add test suite for adau 1371 driver on bf537-stamp | 3 | Closed |
| [#5506] Add USB OTG manual test suite. | 3 | Closed |
| [#5507] Run cpu frequency test in SMP kernel on bf561 | 3 | Closed |
| [#5508] Add test suite for ADXL345/346 Three-Axis Digital Accelerometers | 3 | Closed |
| [#5509] Run power suspend-to-ram test on bf561 smp | 3 | Closed |
| [#5511] Add test suite for ad5258 I2c digital potentiometer | 3 | Closed |
| [#5516] Review, update (coding style), verify, and send to mainline ADAU1361 & ADAU1761 ASoC drivers | 2 | Closed |
| [#5518] Move most bfin uart platform info into board file. | 3 | Closed |
| [#5535] fix bfin_sdh lkml feedback | 3 | Closed |
| [#5539] sound/soc/blackfin/bf5xx-sport.c implementation limits things to 1 SPORT instance | 3 | Closed |
| [#5541] make page reclaim more aggressive | 3 | Open |
| [#5542] Enable ad1938 sound test on bf537 | 3 | Closed |
| [#5545] review trap locking under SMP systems | 3 | Closed |
| [#5571] Add hardware flow control into UART over sport driver based on GPIO PIN. | 3 | Closed |
| [#5584] ADP8860/70 Blacklight Driver | 3 | Closed |
| [#5585] Increase NR_IRQS beyond NR on-chip IRQS | 3 | Closed |
| [#5586] drivers/gpio/adp5588-gpio.c: Add GPIO Interrupt controller | 3 | Closed |
| [#5590] set codec devce to the device model device for the CODEC in ad1980 and ad73311 | 3 | Closed |
| [#5591] integrate codecs into soc-cache | 3 | Closed |
| [#5594] investigate 'Magic Packet Detection' with wakeup from sleep capabilities in bfin mac driver | 3 | Closed |
| [#5613] Add build and test script for adp8870 driver and adp886x adpator board on bf537 | 3 | Open |
| [#5617] Add build and test suite for Bluetooth EZ-Extender on bf537 | 3 | Closed |
| [#5621] Do correct hardware generated ip payload checksum check in bfin mac driver rx int routine | 3 | Closed |
| [#5623] Enable support for packing in PPI driver (bfin_ppi) | 3 | Closed |
| [#5680] Do schedule when return from int and exeption in PREEMPT kernel | 3 | Closed |
| [#5686] Blackfin SPI bus driver should not always enable when resuming | 3 | Closed |
| [#5691] Add new test suite to run 2 SPI devices concurrently with a combination of chip selection | 3 | Closed |
| [#5692] Automate the enc28j60 SPI ethernet test suite. | 3 | Closed |
| [#5693] document audio gadget driver | 3 | Closed |
| [#5697] Add test suite againt adf7021 wifi add-on board | 3 | Open |
| [#5718] Add kernel preemption when return from interrupt to kernel space | 3 | Closed |
| [#5723] Enable 128/256k/512k uncacheable DMA memory region for small memory system | 3 | Closed |
| [#5751] Board Support for BF527-EZKIT V2.1 | 3 | Closed |
| [#5782] Export auxiliary GPIO on the AD7879 to gpiolib | 3 | Closed |
| [#5788] add static plugin support in QT for FLAT format | 3 | Closed |
| [#5843] bfin_mac driver needs to push pin list to board resources | 2 | Closed |
| [#5921] PHYINT support (instead of periodic PHY_POLL | 3 | Closed |
| [#5932] Add test suite for NMI watch dog support on SMP bf561 | 3 | Closed |
| [#5985] Move the ad73322 codec file into ASOC folder and convert rest ad73322 driver into a patch in bfin_patch | 2 | Open |
| [#6007] Convert current IIO ring framework from duplicated in individual drivers into a generic ring implemetation. | 3 | Closed |
| [#6035] Change the bfin_mac driver to use TX interrupt and free skb immediately after DMA is done. | 3 | Closed |
| [#6036] review/update kgdb updates for Blackfin SMP for 2.6.34+ | 3 | Closed |
| [#6114] Enhance bfin_ppi driver to support 24 bit EPPI operation for BF548 | 3 | Closed |
| [#6137] AD7160-Eval framebuffer driver | 3 | Open |
| [#6152] bf5xx_nand: add timeout to ECC_RST polling | 3 | Open |
| [#6167] Prepare for a Linux on blackfin seminar | 3 | Open |
|