|
| ||||
|---|---|---|---|---|---|
| 2008-10-13 | Posted By: Mike Frysinger Blackfin Das U-Boot port updated to 1.3.4 The SVN trunk of U-Boot has been updated to include u-boot-1.3.4. It's a bit rough around the edges, but it should generally be usable. Feel free to file bugs about it in our normal tracker.  Discussions |
||||
| 2009-01-21 | Posted By: Mike Frysinger Blackfin Das U-Boot port updated to 2009.01 The SVN trunk of U-Boot has been updated to include u-boot-2009.01. If everything goes well, we will probably make our next release with this version. Otherwise u-boot-2008.10 should be stable for production use. Feel free to file bugs about it in our normal tracker. Discussions |
||||
| 2009-08-25 | Posted By: Sonic Zhang The 2009R1 release for Blackfin Linux platform is open for download now. The 2009R1 release for Blackfin Linux platform is open for download now. The recommended releases are 2009R1-RC6 for Linux distribution, 2009R1-RC10 for toolchain and 2009R1-RC3 for uboot. In this release, new BF51x, bf522/4/6, bf538/9 cores and relative on-chip peripheral drivers are supported. Dual core SMP kernel and kgdb is enabled for bf561 to allow multi process application to run on both cores. Building and loading code into L2 SRAM is supported by both kernel and toolchain. Power management is full functional on all blackfin cores to save power for embedded application. All hardware anomaly in Blackfin on-chip USB is walked around to make USB driver more stable in both host and peripheral mode. A lot of new peripheral devices are enabled for blackfin, such as ad73322, ssm2602, adv7183B, ad7879, ad5588, ad5520, spi over sport, wifi over sdio, ethernet over spi, sound gardget over USB, etc. JPEG lib is optimized in assembly for blackfin. Oprofile tool is enabled again in kernel 2.6.28. On-chip ATAPI, SDIO and USB is supported in uboot. SPI Eeprom subsystem is replaced by new SPI flash subsystem in uboot. For more details, please read the release notes at http://docs.blackfin.uclinux.org/doku.php?id=uclinux-dist:release-notes:2009r1 http://docs.blackfin.uclinux.org/doku.php?id=toolchain:release-notes:2009r1 http://docs.blackfin.uclinux.org/doku.php?id=bootloaders:u-boot:release-notes:2009r1 The tar ball of 2009R1-RC6 Linux distribution source code, bootable images and test results can be found at http://blackfin.uclinux.org/gf/project/uclinux-dist/frs The RPM packages of 2009R1-RC10 toolchain binaries, source code and test results can be found at http://blackfin.uclinux.org/gf/project/toolchain/frs The tar ball of 2009R1-RC3 uboot souce code, bootable images and test results can be found at http://blackfin.uclinux.org/gf/project/u-boot/frs Any questions, please send email to respective mailing list or the help forum. Linux and application issues: uclinux-dist-devel@blackfin.uclinux.org http://blackfin.uclinux.org/gf/project/uclinux-dist/forum/?action=ForumBrowse&forum_id=39 Toolchain and debugging tool issues: toolchain-devel@blackfin.uclinux.org http://blackfin.uclinux.org/gf/project/toolchain/forum/?action=ForumBrowse&forum_id=39 Boot loader issues: u-boot-devel@blackfin.uclinux.org http://blackfin.uclinux.org/gf/project/u-boot/forum/?action=ForumBrowse&forum_id=39 You can also check out the source code of 2009R1 release from the SVN. svn co http://blackfin.uclinux.org/svn/uclinux-dist/tags/2009R1-RC6 uClinux-dist svn co http://blackfin.uclinux.org/svn/toolchain/tags/2009R1-RC10 toolchain svn co http://blackfin.uclinux.org/svn/u-boot/tags/2009R1-RC3 u-boot Discussions |
||||
| 2010-10-16 | Posted By: Mike Frysinger Blackfin Das U-Boot port updated to 2010.09 The svn trunk has been updated to u-boot-2010.09. Things are flowing much smoother now and hopefully there are no hiccups in the upgrade ! Discussions |
||||
| 2011-04-02 | Posted By: Mike Frysinger Blackfin Das U-Boot port updated to 2011.03 The svn trunk has been updated to u-boot-2011.03. Please try and make it break, but do let us know if it does ! :) Discussions |
||||
| 2011-04-02 | Posted By: Mike Frysinger u-boot development moved to git Most aspects of the u-boot development have been migrated to git now. If people notice any bugs, feel free to open a tracker item on the topic. There probably will be growing pains along the way. Subversion access still exists as a read-only mirror, and only trunk is automatically updated from the git repo. This is mostly to keep from breaking the automated testing that we do internally. Once they update things, this automatic conversion will probably be shut off. http://blackfin.uclinux.org/git/?p=u-boot Discussions |
||||
| 2011-06-28 | Posted By: Mike Frysinger Blackfin Das U-Boot port updated to 2011.06 Another few months and now we have u-boot 2011.06 in our git trunk. Give it a spin! Discussions |
||||
| 2011-10-18 | Posted By: Sonic Zhang Blackfin Toolchain/Linux/Uboot help forums are moving to the Analog Devices' Engineering Zone Since Oct. 24, 2011. We are pleased to announce the Support Forum for u-boot, toolchain and Linux will be moved to a more powerful site, the Analog EngineerZone! EngineerZone brings more powerful functions like permitting you to monitor a single topic by email, this help you to focus on specific topics you are working on, it also permits you to mark your post as "Question" and remark it as "Answered" until the problem is solved. New help communities URLs: Toolchain: http://ez.analog.com/community/dsp/open-source/gnu-toolchain-blackfin">http://ez.analog.com/community/dsp/open-source/gnu-toolchain-blackfin U-boot: http://ez.analog.com/community/dsp/open-source/uboot-blackfin">http://ez.analog.com/community/dsp/open-source/uboot-blackfin uClinux: http://ez.analog.com/community/dsp/open-source/linux-blackfin">http://ez.analog.com/community/dsp/open-source/linux-blackfin These new communities will be launched since Oct. 24 and current forums will be turned into read only one week after the launch time. We will answer any switching released questions in the current forums. Please as other new questions in the new Engineer Zone communities only. Please go to http://ez.analog.com to create a new account, navigate to "Processors and DSP->Open Source Platform and Software" and ask/review the questions there. There is also a "help with using EngineerZone" button to guide you to make advanced use of the EngineerZone. Thanks for your support and understanding. Discussions |
||||
| 2012-04-09 | Posted By: Sonic Zhang The URLs of the blackfin open source help forums on ADI engineer zone are changed. The URLs of the blackfin open source help forums on ADI engineer zone are changed. Please update your bookmarks. Toolchain: http://ez.analog.com/community/dsp/software-and-development-tools/gnu-toolchain-blackfin U-boot: http://ez.analog.com/community/dsp/software-and-development-tools/uboot-blackfin uClinux: http://ez.analog.com/community/dsp/software-and-development-tools/linux-blackfin Discussions |
||||
| 2012-05-04 | Posted By: Sonic Zhang 2012R1 BETA1 Linux distribution for BF60x family is released. ADSP-BF60x is the new generation Blackfin® dual-core processor announced by ADI in late March, 2012. See news at http://www.analog.com/en/press-release/03_28_12_ADI_Blackfin_Processors_Accelerated_Visio/press.html To engage customers into the BF60x based product development earlier, we are pleased to announce the 2012R1 BETA1 release of the Linux distribution for the BF60x family. This release includes 3 packages: 2012R1-BETA1-BF60X buildroot Linux distribution, 2012R1-BETA1 GNU toolchain and 2012R1-BETA1-BF60X Das U-boot. Buildroot Linux distribution is introduced for ADI BF60x and future processors for the first time. An overview and basic guide can be found at http://docs.blackfin.uclinux.org/doku.php?id=buildroot_on_blackfin . All BF5xx processors are still supported in the uClinux distribution, but they are not part of this BF60x specific release. Das U-boot and GNU toolchain now support both BF60x and BF5xx. But, they are only tested against BF60x in this release. That means this 2012R1 Beta release aims BF60x based products only. In addition, as a BETA release, not all features are complete or well tested. Please check the feature list and bug tracker at http://blackfin.uclinux.org . We are now working on the RC release to minimize the gaps. The released images, source code and testing results are free to download from the same web site. We appreciate your bug report and any suggestion on ADI support forums. New features in this release: - Toolchain stays with GCC 4.3. Das u-boot stays with 2011.09. Linux kernel is updated to 3.3.0. Buildroot is based on 2011.05 release. - CPU type BF606, BF607, BF608 and BF609 are supported by GCC. LDR utility is revised to generate BF60x style LDR binary. JTAG debug utility are upgraded to know BF609. - Das U-boot support 4 boot mode for BF609, SPI master boot, NOR flash boot, UART boot and SD boot. - EMAC, SD, UART, I2C/TWI, USB, SPI, SPI flash, NOR flash drivers are enabled on BF609 EZ-Kit in uboot. - Port DMA, EMAC, RSI/SD, UART, I2C/TWI, USB, SPI flash, NOR flash, CAN, Rotary, watchdog and GP timer Linux drivers to BF609. - Develop new Linux drivers for BF609 EZ-Kit, such as SEC, SPI, CRC, link port, etc. - Enable Linux power management and CPU frequency features for BF609. New wake up sources are supported. - Add ieee1588 hardware time stamp support in BF609 EMAC driver. Support IEEE1588 v2 protocol and Linux hardware time stamping API in new PTPd2 server. - VS6624 V4L2 camera driver are enabled via BF609 style EPPI controller. - ad1761 ASOC sound drivers are enabled on top of new BF609 SPORT controller. - USB video camera driver for NOMMU architecture is validated on BF609 EZ-Kit. - Set up new Jenkins based test framework to ease debugging and progress tracking. - Bring up new buildroot Linux distribution for bf60x and future processors. Most user packages in uClinux distribution are included already. More other packages are supported as well. Please read the release notes for more information: http://docs.blackfin.uclinux.org/doku.php?id=uclinux-dist:release-notes:2012r1-beta-bf6xx http://docs.blackfin.uclinux.org/doku.php?id=toolchain:release-notes:2012r1 http://docs.blackfin.uclinux.org/doku.php?id=bootloaders:u-boot:release-notes:2012r1-beta1-bf60x Find 2012R1-BETA1-BF60X Linux distribution source code, bootable images and test results at http://blackfin.uclinux.org/gf/project/buildroot/frs Find 2012R1-BETA1 toolchain binaries, source code and test results at http://blackfin.uclinux.org/gf/project/toolchain/frs Find 2012R1-BETA1-BF60X uboot source code, bootable images and test results at http://blackfin.uclinux.org/gf/project/u-boot/frs Any questions, please send email to respective mailing list or the Analog Devices Engineer Zone Communities. Linux and application issues: uclinux-dist-devel@blackfin.uclinux.org http://ez.analog.com/community/dsp/software-and-development-tools/linux-blackfin Toolchain and debugging tool issues: toolchain-devel@blackfin.uclinux.org http://ez.analog.com/community/dsp/software-and-development-tools/gnu-toolchain-blackfin Das u-boot issues: u-boot-devel@blackfin.uclinux.org http://ez.analog.com/community/dsp/software-and-development-tools/uboot-blackfin You can also check out the source code from the SCMs svn co http://blackfin.uclinux.org/svn/toolchain/tags/2012R1-BETA1 toolchain git clone git://sources.blackfin.uclinux.org/git/buildroot git checkout 2012R1-BETA1-BF60X git clone git://sources.blackfin.uclinux.org/git/linux-kernel git checkout 2012R1-BETA1-BF60X git clone git://sources.blackfin.uclinux.org/git/u-boot git checkout 2012R1-BETA1-BF60X Discussions |
||||
| 2012-08-01 | Posted By: Sonic Zhang 2012R1 Das u-boot for BF60x is offially released today. ADSP-BF60x is the new generation Blackfin® dual-core processor announced by Analog Devices in late March, 2012. See news at http://www.analog.com/en/press-release/03_28_12_ADI_Blackfin_Processors_Accelerated_Visio/press.html To engage customers into the BF60x based product development earlier, we are pleased to announce the 2012R1 Linux stable release for the BF60x family. This release includes 3 packages: 2012R1-RC6-BF60X buildroot Linux distribution, 2012R1-RC2 GNU toolchain and 2012R1-RC4-BF60X Das U-boot. The buildroot Linux distribution is introduced for ADI BF60x and future processors. An overview and basic guide can be found at http://docs.blackfin.uclinux.org/doku.php?id=buildroot_on_blackfin . BF5xx processors are still supported in the uClinux distribution, but they are not part of this BF60x specific Linux release. Das U-boot and GNU toolchain support both BF60x and BF5xx. But, they are only tested against BF60x in this release. Overall, this 2012R1 stable release is for BF60x only. The released binary images, source code and testing results are free to download from the same web site. We appreciate your bug reports and suggestions. These should be submitted via the appropriate support forums, listed at the end of this document. New features in this release: - Toolchain stays with GCC 4.3. Das u-boot stays with 2011.09. Linux kernel is updated to 3.3.0. Buildroot is based on 2011.05 release. - CPU type BF606, BF607, BF608 and BF609 are supported by GCC. LDR utility is revised to generate BF60x style LDR binary. JTAG debug utility are upgraded to know BF609. GDB stays at v6.6. binutility moves up to 2.21. - uClibc stays at v0.9.29 with new functions exp2, exp2f, log2 and log2f functions supported. - Das U-boot support 4 boot modes for BF609, SPI master boot, NOR flash boot, UART boot and SD boot. - EMAC, SD, UART, I2C/TWI, USB, SPI, SPI flash, NOR flash drivers are enabled on BF609 EZ-Kit in uboot. - Port DMA, EMAC, RSI/SD, UART, I2C/TWI, USB, SPI flash, NOR flash, CAN, Rotary, watchdog and GP timer Linux drivers to BF609. - Develop new Linux drivers for BF609 EZ-Kit, such as SEC, SPI, CRC, link port, etc. - Enable Linux power management and CPU frequency features for BF609. New wake up sources are supported. - Add ieee1588 hardware time stamp support in BF609 EMAC driver. Support IEEE1588 v2 protocol in new PTPd2 server with average 500ns time offset. - MCAPI library and ICC driver is implemented to support inter core communication between Linux on BF60x core 0 and CrossCore® Embedded Studio application on core 1. GNU bare metal MCAPI support for core 1 is also available. - Develop new ADV7842 and ADV7511 HDMI V4L2 video out and video in drivers for BF60x-Ezkit video extenders. Video format 720P at 50/60Hz is supported. - VS6624 V4L2 camera driver are enabled via BF609 style EPPI controller. - ad1761 ASOC sound drivers are enabled on top of new BF609 SPORT controller. - USB video camera driver for NOMMU architecture is validated on BF609 EZ-Kit. - Set up new Jenkins based test framework to ease debugging and progress tracking. - Bring up new buildroot Linux distribution for bf60x and future processors. Most user packages in uClinux distribution as well as many other packages are included. Please read the release notes for more information: http://docs.blackfin.uclinux.org/doku.php?id=uclinux-dist:release-notes:2012r1-bf6xx http://docs.blackfin.uclinux.org/doku.php?id=toolchain:release-notes:2012r1 http://docs.blackfin.uclinux.org/doku.php?id=bootloaders:u-boot:release-notes:2012r1-rc1-bf60x Find 2012R1-RC6-BF60X Linux distribution source code, bootable images and test results at http://blackfin.uclinux.org/gf/project/buildroot/frs Find 2012R1-RC2 toolchain binaries, source code and test results at http://blackfin.uclinux.org/gf/project/toolchain/frs Find 2012R1-RC4-BF60X uboot source code, bootable images and test results at http://blackfin.uclinux.org/gf/project/u-boot/frs Any questions, please send email to respective mailing list or the Analog Devices Engineer Zone Communities. Linux and application issues: uclinux-dist-devel@blackfin.uclinux.org http://ez.analog.com/community/dsp/software-and-development-tools/linux-blackfin Toolchain and debugging tool issues: toolchain-devel@blackfin.uclinux.org http://ez.analog.com/community/dsp/software-and-development-tools/gnu-toolchain-blackfin Das u-boot issues: u-boot-devel@blackfin.uclinux.org http://ez.analog.com/community/dsp/software-and-development-tools/uboot-blackfin You can also check out the source code from the SCMs svn co http://blackfin.uclinux.org/svn/toolchain/tags/2012R1-RC2 toolchain git clone git://sources.blackfin.uclinux.org/git/buildroot git checkout 2012R1-RC6-BF60X git clone git://sources.blackfin.uclinux.org/git/linux-kernel git checkout 2012R1-RC6-BF60X git clone git://sources.blackfin.uclinux.org/git/u-boot git checkout 2012R1-RC4-BF60X Discussions |
||||
| 2013-02-04 | Posted By: Sonic Zhang The 2012R2 uboot release for Blackfin is ready for download The new buildroot distribution was introduced in the 2012R1 Linux release for BF60x in Aug. 2012. To help BF5xx customers to leverage new features in the buildroot distribution, we are pleased to announce the 2012R2 buildroot Linux release for both BF5xx and BF60x families. Although the uClinux related issues in 2011R1 and former releases are still supported via the Linux community on the ADI Engineering Zone, the uClinux distribution for BF5xx is discontinued since the 2012R2 release. Please upgrade to the buildroot distribution in the 2012R2 release for latest features in Linux kernel and middle wares. An overview and basic development guide for the buildroot can be found at http://docs.blackfin.uclinux.org/doku.php?id=buildroot_on_blackfin . This release includes 3 packages: 2012R2-RC5 buildroot Linux distribution, 2012R2-RC2 GNU toolchain and 2012R2-RC3 Das U-boot. The binary images, source code and testing results are free to download from http://blackfin.uclinux.org . We appreciate your bug reports and suggestions. New features in this release: [GNU Toolchian] - Toolchain stays with GCC 4.3. - QEMU 1.2.0 available - Upgrade to uClibc 0.9.33.2. Updated bfin config file. Roll back upstream's generic v-fork. - Better multicore support in gdbproxy. - Enhance the LDR utility to pack uboot elf binary for core 0 and CCES elf binary for core 1 into one LDR image. Binaries in one LDR image can be loaded to both cores by the bootrom. [Das U-boot] - Das u-boot updates to 2012.07. - Correct mess console output in NOR flash BYPASS boot mode for BF533, BF537 and BF561 when enable early serial debugging option. - Add softswitch command to set up BF609-ezkit onboard switch configuration. - Update DDR clock parameters for BF609 to improve DDR read/write performance. [Linux] - Linux kernel is updated to 3.5.7. Buildroot is based on 2012.08 release. - Support bf548 v0.4 processor - Add tdm support in ASOC sport driver for bf60x. Bring up ad1836 sound codec driver on top of bf60x sport driver. - Add NEC NL8048HL LCD frame buffer driver for BF60x and the EI3 LCD extender. Add aptina mt9m114 V4L2 camera driver for BF60x and the EI3 Camera extender with frame rate setting capability, 720P resolution support and frame error indication. - Allow user to tune crossbar bandwidth and priority configuration on BF60x. - Update the IEEE1588 PTP driver to the new hardware time stamping framework for BF518 and BF609. Replace system stamp with the raw hardware one. Provide a PTP hardware clock device. - Implement the resource management protocol defined in ICC spec for both Linux kernel and bare metal stub on BF609 and BF561. - Enhance buildroot configuration to support BF5xx family processors and ADI BF5xx evaluation boards. - Enable QT 4.8.2 to be built and run properly on blackfin. [Others] - Port all BF5xx test suites under uClinux distribution to the Jenkins framework for buildroot. Add new Jenkins projects for each BF5xx regression board. Please read the release notes for more information: http://docs.blackfin.uclinux.org/doku.php?id=uclinux-dist:release-notes:2012r2 http://docs.blackfin.uclinux.org/doku.php?id=toolchain:release-notes:2012r2 http://docs.blackfin.uclinux.org/doku.php?id=bootloaders:u-boot:release-notes:2012r2-rc2 Find 2012R1-RC5 Linux distribution source code, bootable images and test results at http://blackfin.uclinux.org/gf/project/buildroot/frs Find 2012R1-RC2 toolchain binaries, source code and test results at http://blackfin.uclinux.org/gf/project/toolchain/frs Find 2012R1-RC3 uboot source code, bootable images and test results at http://blackfin.uclinux.org/gf/project/u-boot/frs Any questions, please send email to respective mailing list or the Analog Devices Engineer Zone Communities. Linux kernel and buildroot distribution issues: buildroot-devel@blackfin.uclinux.org http://ez.analog.com/community/dsp/software-and-development-tools/linux-blackfin GNU Toolchain and debugging tool issues: toolchain-devel@blackfin.uclinux.org http://ez.analog.com/community/dsp/software-and-development-tools/gnu-toolchain-blackfin Das u-boot issues: u-boot-devel@blackfin.uclinux.org http://ez.analog.com/community/dsp/software-and-development-tools/uboot-blackfin You can also check out the source code from the SCMs svn co http://blackfin.uclinux.org/svn/toolchain/tags/2012R2-RC2 toolchain git clone git://sources.blackfin.uclinux.org/git/buildroot git checkout 2012R1-RC5 git clone git://sources.blackfin.uclinux.org/git/linux-kernel git checkout 2012R1-RC5 git clone git://sources.blackfin.uclinux.org/git/u-boot git checkout 2012R1-RC3 Discussions |
||||
