| Post Date | Summary |
|---|---|
| 2005-10-12 | Posted By: Maggie Nakhla BF537 STAMP Boards BF537 STAMP Boards are now shipping to distributors! Part Number: ADDS-BF537-STAMP Price: $200 US List of local distributors: http://www.analog.com/salesdir/continent.asp. For more information on the board: http://www.analog.com/en/prod/0,2877,BF537%252DSTAMP,00.html |
| 2005-05-17 | Posted By: David Skocypec moo Stamp Board Revision Change The STAMP board is a flexible development platform. To accommodate the maximum number of configuration options, some layout compromises were made. Version 1.2 STAMP board SDRAM is being tested at 110 MHz. Setting the SDRAM frequency higher than 110 MHz may cause any number of errors - including SDRAM read errors which leads to incorrect instructions being executed by the processor. Please also note that v0.9, v1.0, and v1.1 STAMP boards SDRAM were tested at 80 MHz. Version 0.9, version 1.0 and version 1.1 STAMP boards require improvements to the SPORT connector for signal integrity and noise rejection. If you see this noise issue on your existing board, you can add a resistor and cap to the SPORT line. The rework instructions are shown in the v1.0, v1.1 re-work instructions. Changes made to v1.2: - added series resistors on the SPORT lines. - added termination resistors on the SDRAM |
| 2005-04-27 | Posted By: Maggie Nakhla Daughter cards for the STAMP Board There are three SPI daughter cards available for the STAMP board: the AD7476, the AD7476A, and the AD7940. The part numbers for these daughter cards are: AD7476-DBRD: http://www.analog.com/en/content/0,2886,760_788_60592,00.html AD7476A-DBRD: http://www.analog.com/en/content/0,2886,760_788_65445_0,00.html AD7940-DBRD The daughter cards are available through you local Analog Devices sales and distributors. For a list of local sales and distributors: http://www.analog.com/salesdir/continent.asp. |
| 2004-11-29 | Posted By: David Skocypec moo BF533 STAMP Boards Shipping The first run of BF533 STAMP boards have started shipping to distributors!!! The board part number is ADDS-BF533-STAMP. You can find a list of local distributors here: http://www.analog.com/salesdir/continent.asp. A detailed description of the board can be found here: http://www.analog.com/en/prod/0%2C2877%2CBF533%25252DSTAMP%2C00.html |
| 2004-09-30 | Posted By: David Skocypec moo BF533 Stamp boards for sale STAMP boards will be available for purchase in the middle of November. The first run will be a limited build so make sure you pre-order a board to guarantee getting one. There are two companies taking pre-orders at this time. Digikey: http://www.digikey.com/scripts/DkSearch/dksus.dll?PName?Name=ADDS-BF533-STAMP-ND Eltech: http://www.eltech.spb.ru/blackfin/stamp_board.php. |
| 2004-03-17 | Posted By: Aaron Whittemore AD1836A Audio Codec Daughter Card The preliminary schematic and OrCAD files for the AD1836A Audio Codec Daughter Card for the STAMP board have been posted and can be viewed under the stamp project page. |
| 2004-03-10 | Posted By: Aaron Whittemore ADV7183A and ADV7171 Daughter Cards Preliminary schematics are available for the ADV7183A and the ADV7171 Daughter Cards. Feedback is greatly appreciated. |
| 2004-02-18 | Posted By: Robin Getz New Survey A new survey can be found at: http://blackfin.uclinux.org/survey/survey.php?group_id=7&survey_id=4 Please take the time to let me know if you like this design, and would like to see more like it. Thanks |
