|
| ||||
|---|---|---|---|---|---|
| 2009-07-31 | Posted By: Harald Krapfenbauer U-Boot for cm-bf537e I've updated the pre-compiled U-Boot for the cm-bf537e core module in the FILES section. *NEW*: flread command for reading from flash with GPIO addressing Please read the README file for more information. Best regards, Harald  Discussions |
||||
| 2009-08-19 | Posted By: Harald Krapfenbauer Updated support for Blackfin Core Modules We are currently updating uClinux support for Bluetechnix Core Modules! There are now updated precompiled images for all Bluetechnix Core Modules in the FILES section. Tested in U-Boot and uClinux: - Flash memory - Ethernet connection - USB host/device/OTG - MMC/SD card over SPI - Initramdisk support - JFFS2 support In cooperation with the Blackfin uClinux developers, we will integrate support for our modules into mainline code soon! Best regards, Harald Discussions |
||||
| 2009-09-03 | Posted By: Harald Krapfenbauer Bluetechnix uClinux User Guide - Update! We've updated the Bluetechnix uClinux User Guide. Download available in the Files section. Have fun, Harald Krapfenbauer Discussions |
||||
| 2009-09-04 | Posted By: Harald Krapfenbauer UART Boot **NEW** Pre-compiled u-boot images for booting over UART where added to the files section for the following core modules: CM-BF527 CM-BF537E CM-BF537U TCM-BF537 CM-BF548 Have fun! Harald Discussions |
||||
| 2010-01-14 | Posted By: Harald Krapfenbauer Bluetechnix TCM-BF518 support available We have integrated support for the newest core module TCM-BF518 in U-Boot and uClinux! U-Boot support is already mainline (in trunk). There are patches for Linux support, will be mainline soon! Download pre-compiled images from the "Files" section. Best regards, Harald Krapfenbauer Discussions |
||||
| 2010-10-19 | Posted By: Harald Krapfenbauer Blackfin Core Modules Support It's time to update support for our Core Modules in U-Boot and uClinux! We will move some stuff that was hosted here to the Bluetechnix support Wiki in the near future. Check here: https://support.bluetechnix.at/wiki/UClinux Discussions |
||||
| 2010-10-29 | Posted By: Harald Krapfenbauer New pre-compiled images! We have put new pre-compiled images onto our FTP server, please check https://support.bluetechnix.at/wiki/Getting_started_(Blackfin_uClinux). There's also a (yet incomplete) feature matrix for our boards. I don't remove the images from the Files section for now. Happy developing, Harald Krapfenbauer Bluetechnix Discussions |
||||
| 2010-12-07 | Posted By: Harald Krapfenbauer Special OFFER @ Digi-Key The first 10 sold Bluetechnix CM-BF537E Blackfin Starter Kits will include a gnICE JTAG Emulator for free! Check DigiKey http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=bluetechnix for further Bluetechnix products. Discussions |
||||
| 2011-05-27 | Posted By: Harald Krapfenbauer New place for pre-compiled modules As announced earlier, there's a new place for pre-compiled images for Bluetechnix core modules: https://support.bluetechnix.at/wiki/Getting_started_%28Blackfin_uClinux%29#Pre-compiled_images Outdated images from the "Files" section were removed now. Will will continue to post news and answer forum questions here!! Best regards, Harald Krapfenbauer Bluetechnix Discussions |
||||
